簡易檢索 / 詳目顯示

回結果列表
研究生： 李宗勳
Lee, Tsung-Hsun
論文名稱： 應用於中壓固態變壓器之三階直流轉換器研製
Implementation of the Three-Level DC-DC Converter Applied in Medium-Voltage Solid-State Transformer
指導教授： 陳建富
Chen, Jiann-Fuh
學位類別： 碩士
Master
系所名稱： 電機資訊學院 - 電機工程學系
Department of Electrical Engineering
論文出版年： 2018
畢業學年度： 106
語文別： 英文
論文頁數： 105
中文關鍵詞： 中壓固態變壓器 、諧振式轉換器 、配電系統
外文關鍵詞： Medium-voltage solid-state transformer, Resonant converter, Distribution system
相關次數： 點閱：117  下載：9 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 隨著元件的進步，以及分散式電源的興起，中壓固態變壓器成為近年來越來越熱門的研究項目。中壓固態變壓器具有多功能且高性能的特性，其中包括了整合微電網、校正功率因數、補償無效功率、隔離故障電流、調整輸出電壓以及節省重量和體積等等。本文提出之中壓固態變壓器應用於11.4 kVAC配電系統，其中直流轉換器由13具模組組成，高壓輸入端互相串聯，而低壓輸出端互相並聯。本文設計並實現了單一模組，該輸入電壓為1.52 kVDC、輸出電壓為380 VDC以及輸出功率為10 kW，其模組架構為LLC諧振式轉換器。本文旨在轉換器及中壓變壓器的分析與設計，其中電路之動作原理、穩態分析、電路元件的參數的設計以及變壓器之參數設計、絕緣考量、損耗最佳化皆會在本文中詳述。此外，本文利用軟體SIMPLIS和COMSOL Multiphysics®模擬與驗證其設計之真確性。
    最後，根據本文之設計流程，研製一組輸入電壓為1.52 kVDC、輸出電壓為380 VDC以及輸出功率為10 kW之雛形電路以及一組中壓變壓器以驗證該電路之可行性。

    As the progress of wide-bandgap (WBG) semiconductor devices and the rise of distributed energy resources (DER), medium-voltage solid-state transformer (SST) becomes more and more popular in recent years. Medium-voltage SST features high-performance and fantastic functionality. The SST proposed in this thesis is applied in 11.4 kVAC distribution system, and the DC stage of the SST is composed of 13 modules. Operating principle, steady-state analysis and components design of the converter as well as the parameter design, insulation consideration and loss optimization of the transformer, are described in detail in this thesis. Meanwhile, the simulation software SIMPLIS and COMSOL Multiphysics® are used to ensure the validity.
    Finally, a prototype converter with input voltage 1.52 kVDC, output voltage 380 VDC and output power 10 kW is designed and realized to verify the feasibility of the module applied in SST.

    摘要 i Abstract ii Acknowledgement iii Contents v List of Tables vii List of Figures viii Chapter 1. Introduction 1 1.1 Background and Motivation 1 1.2 Topology of Solid-State Transformer 2 1.3 Thesis Outline 9 Chapter 2. Functions and Advantages of Solid-State Transformer 10 2.1 Integration of Microgrid 10 2.2 Power Factor Correction 13 2.3 Reactive Power Support 16 2.4 Fault Isolation 18 2.5 Saving Volume and Weight 19 2.6 Voltage Regulation 20 Chapter 3. Analysis and Design of the Three-level DC-DC Converter 22 3.1 Three-level DC-DC LLC Converter 22 3.2 Operating Principle 25 3.3 Steady-state Analysis 33 3.3.1 Voltage Conversion Ratio 34 3.3.2 Choosing Operating Region 36 3.3.3 Design Consideration of the Coefficient Q and K 38 3.4 Design Consideration of the Transformer 40 3.4.1 Insulation 41 3.4.2 Core 43 3.4.3 Windings 46 Chapter 4. Parameter Design and Experimental Results 47 4.1 Choosing Materials and Parameter Design of the Transformer 47 4.1.1 Parameter Design of the Cast Resin Transformer 48 4.1.2 Choosing Insulation Materials 51 4.1.3 Design and Manufacture of Bobbin 53 4.1.4 Loss Optimization of the Transformer 56 4.2 Parameter Design of Components 63 4.2.1 Components of Resonant Tank 63 4.2.2 Semiconductor Devices 69 4.2.3 Input Capacitor 70 4.2.4 Output Capacitor 72 4.2.5 Choosing Isolated Gate Driver 74 Chapter 5. Simulation and Experimental Results 75 5.1 Simulation 75 5.1.1 Finite Element Method 75 5.1.2 Circuit Simulation 80 5.2 Experimental Equipment 84 5.3 Experimental Results 88 5.3.1 Examination of Transformer 88 5.3.2 Experimental Waveforms 92 5.3.3 Efficiency 99 Chapter 6. Conclusions and Future Works 100 6.1 Conclusions 100 6.2 Future Works 101 References 102

    [1] W. Mcmurray, "Power converter circuit having a high frequency link," Patent U.S. Patent 3,517,300, 1968.
    [2] A. Q. Huang, "Medium-Voltage Solid-State Transformer: Technology for a Smarter and Resilient Grid," IEEE Industrial Electronics Magazine, vol. 10, no. 3, pp. 29-42, 2016.
    [3] A. Q. Huang, Q. Zhu, L. Wang, and L. Zhang, "15 kV SiC MOSFET: An enabling technology for medium voltage solid state transformers," CPSS Transactions on Power Electronics and Applications, vol. 2, no. 2, pp. 118-130, 2017.
    [4] S. Falcones, X. Mao, and R. Ayyanar, "Topology comparison for Solid State Transformer implementation," in IEEE PES General Meeting, 2010, pp. 1-8.
    [5] M. Kang, P. N. Enjeti, and I. J. Pitel, "Analysis and design of electronic transformers for electric power distribution system," IEEE Transactions on Power Electronics, vol. 14, no. 6, pp. 1133-1141, 1999.
    [6] S. Bifaretti, P. Zanchetta, A. Watson, L. Tarisciotti, and J. C. Clare, "Advanced Power Electronic Conversion and Control System for Universal and Flexible Power Management," IEEE Transactions on Smart Grid, vol. 2, no. 2, pp. 231-243, 2011.
    [7] J. S. Lai, W. H. Lai, S. R. Moon, L. Zhang, and A. Maitra, "A 15-kV class intelligent universal transformer for utility applications," in 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), 2016, pp. 1974-1981.
    [8] C. Zhao et al., "Power Electronic Traction Transformer-Medium Voltage Prototype," IEEE Transactions on Industrial Electronics, vol. 61, no. 7, pp. 3257-3268, 2014.
    [9] S. Bhattacharya et al., "Design and development of Generation-I silicon based Solid State Transformer," in 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2010, pp. 1666-1673.
    [10] F. Wang, G. Wang, A. Huang, W. Yu, and X. Ni, "Design and operation of A 3.6kV high performance solid state transformer based on 13kV SiC MOSFET and JBS diode," in 2014 IEEE Energy Conversion Congress and Exposition (ECCE), 2014, pp. 4553-4560.
    [11] J. Rodriguez, L. Jih-Sheng, and P. Fang Zheng, "Multilevel inverters: a survey of topologies, controls, and applications," IEEE Transactions on Industrial Electronics, vol. 49, no. 4, pp. 724-738, 2002.
    [12] Y. Xiaoming and I. Barbi, "Fundamentals of a new diode clamping multilevel inverter," IEEE Transactions on Power Electronics, vol. 15, no. 4, pp. 711-718, 2000.
    [13] C. Hochgraf, R. Lasseter, D. Divan, and T. A. Lipo, "Comparison of multilevel inverters for static VAr compensation," in Proceedings of 1994 IEEE Industry Applications Society Annual Meeting, 1994, pp. 921-928 vol.2.
    [14] L. Jih-Sheng and P. Fang Zheng, "Multilevel converters-a new breed of power converters," in Industry Applications Conference, 1995. Thirtieth IAS Annual Meeting, IAS '95., Conference Record of the 1995 IEEE, 1995, vol. 3, pp. 2348-2356 vol.3.
    [15] A. Shukla, A. Ghosh, and A. Joshi, "Hysteresis Current Control Operation of Flying Capacitor Multilevel Inverter and Its Application in Shunt Compensation of Distribution Systems," IEEE Transactions on Power Delivery, vol. 22, no. 1, pp. 396-405, 2007.
    [16] G. Yilei, L. Zhengyu, H. Lijun, Q. Zhaoming, and H. Guisong, "Three-level LLC series resonant DC/DC converter," IEEE Transactions on Power Electronics, vol. 20, no. 4, pp. 781-789, 2005.
    [17] D. Kumar, F. Zare, and A. Ghosh, "DC Microgrid Technology: System Architectures, AC Grid Interfaces, Grounding Schemes, Power Quality, Communication Networks, Applications, and Standardizations Aspects," IEEE Access, vol. 5, pp. 12230-12256, 2017.
    [18] I. Colak, "Introduction to smart grid," in 2016 International Smart Grid Workshop and Certificate Program (ISGWCP), 2016, pp. 1-5.
    [19] W. A. Rodrigues, R. A. S. Santana, A. P. L. Cota, T. R. Oliveira, L. M. F. Morais, and P. C. Cortizo, "Integration of solid state transformer with DC microgrid system," in 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC), 2016, pp. 1-6.
    [20] U. Manandhar, A. Ukil, and T. K. K. Jonathan, "Efficiency comparison of DC and AC microgrid," in 2015 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA), 2015, pp. 1-6.
    [21] K. Shimomachi, R. Hara, and H. Kita, "Comparison between DC and AC microgrid systems considering ratio of DC load," in 2015 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), 2015, pp. 1-4.
    [22] A. F. Bastos, S. Santoso, and L. Biyikli, "Analysis of power factor over correction in a distribution feeder," in 2016 IEEE/PES Transmission and Distribution Conference and Exposition (T&D), 2016, pp. 1-5.
    [23] J. F. Peters, "Harmonics in Transformer Magnetizing Currents," Transactions of the American Institute of Electrical Engineers, vol. XXXIV, no. 2, pp. 2157-2182, 1915.
    [24] X. Wang, F. Blaabjerg, and W. Wu, "Modeling and Analysis of Harmonic Stability in an AC Power-Electronics-Based Power System," IEEE Transactions on Power Electronics, vol. 29, no. 12, pp. 6421-6432, 2014.
    [25] A. Subramaniam, A. Sahoo, S. S. Manohar, and S. K. Panda, "Voltage and current-harmonics induced ageing in electrical insulation," in 2017 International Symposium on Electrical Insulating Materials (ISEIM), 2017, vol. 1, pp. 403-406.
    [26] J. d. O. Pacheco, F. J. B. Brito, D. R. Joca, J. L. W. Oliveira, P. P. Praça, and D. d. S. Oliveira, "Bidirectional modular multilevel PFC rectifier based on cascading full-bridge and interleaving technique suitable for SST applications," in 2016 12th IEEE International Conference on Industry Applications (INDUSCON), 2016, pp. 1-7.
    [27] M. A. Kamarposhti, M. Alinezhad, H. Lesani, and N. Talebi, "Comparison of SVC, STATCOM, TCSC, and UPFC controllers for Static Voltage Stability evaluated by continuation power flow method," in 2008 IEEE Canada Electric Power Conference, 2008, pp. 1-8.
    [28] S. S. Kumar, V. Subbiah, A. Kandaswaray, G. D. Kumar, R. Sujay, and S. Manoharan, "A state of the art STATCON for instantaneous VAr compensation and harmonic suppression to enhance power quality," in CIGRE/IEEE PES International Symposium Quality and Security of Electric Power Delivery Systems, 2003. CIGRE/PES 2003., 2003, pp. 86-90.
    [29] M. Noroozian, N. A. Petersson, B. Thorvaldson, A. B. Nilsson, and C. W. Taylor, "Benefits of SVC and STATCOM for electric utility application," in 2003 IEEE PES Transmission and Distribution Conference and Exposition (IEEE Cat. No.03CH37495), 2003, vol. 3, pp. 1143-1150 vol.3.
    [30] H. Samet and M. A. Jarrahi, "A comparison between SVC and STATCOM in flicker mitigation of electric arc furnace using practical recorded data," in 2015 30th International Power System Conference (PSC), 2015, pp. 300-304.
    [31] O. Vodyakho, M. Steurer, C. Edrington, G. Karady, and S. Bhattacharya, "Instantiation of solid state fault isolation devices for future power electronic based distribution systems," in IEEE PES General Meeting, 2010, pp. 1-8.
    [32] M. A. Rezaei and A. Huang, "Ultra fast protection of radial and looped electric power grid using a novel solid-state protection device," in 2012 IEEE Energy Conversion Congress and Exposition (ECCE), 2012, pp. 610-614.
    [33] L. Kong and H. Nian, "Collaborative control strategy of power electronic transformer and fault current limiter in DC microgrid," The Journal of Engineering, vol. 2017, no. 13, pp. 1788-1792, 2017.
    [34] J. E. Huber and J. W. Kolar, "Applicability of Solid-State Transformers in Today's and Future Distribution Grids," IEEE Transactions on Smart Grid, pp. 1-1, 2017.
    [35] J. E. Huber and J. W. Kolar, "Volume/weight/cost comparison of a 1MVA 10 kV/400 V solid-state against a conventional low-frequency distribution transformer," in 2014 IEEE Energy Conversion Congress and Exposition (ECCE), 2014, pp. 4545-4552.
    [36] F. Vaca-Urbano and M. S. Alvarez-Alvarado, "Power quality with solid state transformer integrated smart-grids," in 2017 IEEE PES Innovative Smart Grid Technologies Conference - Latin America (ISGT Latin America), 2017, pp. 1-6.

    下載圖示 校內：2023-07-01公開
    校外：2023-07-01公開
    QR CODE