| 研究生: |
陳嘉緯 Chen, Jia-Wei |
|---|---|
| 論文名稱: |
非接觸式感應充電杯之研製 Implementation of contactless inductive charging cup |
| 指導教授: |
李嘉猷
Lee, Jia-You |
| 學位類別: |
碩士 Master |
| 系所名稱: |
電機資訊學院 - 電機工程學系 Department of Electrical Engineering |
| 論文出版年: | 2008 |
| 畢業學年度: | 96 |
| 語文別: | 中文 |
| 論文頁數: | 68 |
| 中文關鍵詞: | 電磁感應 、藍芽耳機 |
| 外文關鍵詞: | Inductively Power Transfer, bluetooth |
| 相關次數: | 點閱:66 下載:15 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本文旨以非接觸式感應充電技術設計一個充電杯,俾提供藍芽耳機、助聽器、錄音筆或MP3等小功率可攜式電子產品之充電。文中首先論述非接觸式電能傳輸之原理與應用範疇,接著提出系統所使用之電路架構與感應結構並說明其特性。就電路設計方面,係以鬆耦合變壓器模型分析開始,探討漏感成份對感應傳輸之影響,繼而導入諧振電路設計,改善電路阻抗特性,增加系統性能。就控制電路部份,俾以單晶片實現選擇性觸發功能與變頻控制,針對充電物品的擺放位置開啟初級側線圈與調整系統操作頻率,使兩者得到較好的配置。最後,將所設計的感應充電系統予以實際電路實現,使用200mAh之鋰高分子電池作為充電負載,並量測其實驗結果與數據。
This thesis presents the design of contactless inductive charging cup for low power portable electric appliances, such as bluetooth, hearing aid, pen recorder or MP3. First, the fundamental principle and application fields of contactless power transmission are discussed, and the circuit topology and the coupling structure which this system adopts are proposed. As for circuit design, since the contactless power transmit ability is restricted by loosely coupled power transformer, thus the design of the resonant circuit can improve the characteristic of impedance and the system performance. When it comes to control circuit, while variation of the placement of charged objects will cause difference in the parameter of resonant circuit; hence, microchip is utilized to implement selective excitation circuit and variable frequency control. Finally, a 200mA Li-Polymer battery is applied as load to actualize the designed system, and the experimental results and data are provided.
參考文獻
[1] 尤宗旗,生醫微波無線充電系統,國立成功大學電機工程學系碩士論文,2003。
[2] 王春清、賴信賓、陳良瑞,無線電波能源充電之研究,第六屆台灣電力電子研討會,1605-1608頁,2007。
[3] 羅國原,非接觸式感應充電技術應用於可攜式電子產品之研究,國立成功大學電機工程學系碩士論文,2006。
[4] 張宗文,陣列鐵芯結構應用於非接觸式手機充電平台之研究,國立成功大學電機工程學系碩士論文,2007。
[5] 萬泰麟,非接觸式感應充電技術應用於小家電裝置之研究,國立成功大學電機工程學系碩士論文,2007。
[6] 劉志祥、胡俊宏、陳清木、陳財榮、呂奕徵,通用型非接觸式手持裝置充電器之研製,第六屆台灣電力電子研討會,350-354頁,2007。
[7] 賴嘉輝、卓峰斌、陳士霖、陳財榮、胡俊宏,非接觸式充電器之研製,第六屆台灣電力電子研討會,355-360頁,2007。
[8] F. Sato, T. Nomoto, G. Kano, H. Matsuki, and T. Sato, “A new contactless power-signal transmission device for implanted functional electrical stimulation (FES),” IEEE Trans. Magn., vol. 40, no. 4, pp. 2964-2966, 2004.
[9] 曾紀澤,射頻能量傳輸用於無電源非接觸量測系統,國立台灣海洋大學電機工程學系碩士論文,2006。
[10] 謝翔、張春、王志華,生物醫學中的植入式電子系統的現況與發展,電子學報,32卷3期,462-467頁,2004。
[11] M. Ryu, Y. Park, J. Baek, and H. Cha,“ Analysis of the contactless power transfer system using modeling and analysis of the contactless transformer,” in Proc. IEEE IECON, 2005, pp.1036-1042.
[12] M. Ryu, Y. Park, J. Baek, and H. Cha,“ Comparison and analysis of the contactless power transfer systems using the parameters of the contactless transformer,” in Proc. IEEE PESC, 2006, pp.1-6.
[13] 李依穎,非接觸式感應饋電技術應用於可動機具之研究,國立成功大學電機工程學系碩士論文,2006。
[14] 杜明育,非接觸式線性感應供電軌道之研究,國立成功大學電機工程學系碩士論文,2007。
[15] 楊欣穎、劉旺林、賴嘉輝、陳財榮、陳德超,移動載具非接觸式充電系統之研究,第六屆台灣電力電子研討會,345-349頁,2007。
[16] K. Finkenzeller, RFID HANDBOOK. 2nd ed., Wiley, 2003.
[17] B. Bhuptani and M. Shahram, RFID Field Guide., Prentice Hall PTR, 2005.
[18] D. Kacprzak, G. A. Covic, and J. T. Boy, “An improved magnetic design for inductively coupled power transfer system pickups,” in Proc. IPEC, 2005, vol. 2, pp. 1133-1136.
[19] S. Y. R. Hui and Wing. W. C. Ho, “A new generation of universal contactless battery charging platform for portable consumer electronic equipment,” IEEE Trans. Power Electron., vol. 20, no. 3, pp. 620-627, 2005.
[20] L. Xun and S. Y. Hui, “Simulation study and experimental verification of a universal contactless battery charging platform with localized charging features,” IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2202-2210, 2007.
[21] J. Achterberg, E. A. Lomonova, and J. de Boeij, “Coil array structures compared for contactless battery charging platform,” IEEE Trans. Magn., vol. 44, no. 5, pp. 617-622, 2008.
[22] S. Y. Hui, H. S. H. Chung, and S. C. Tang, “Coreless printed circuit board (PCB) transformers for power MOSFET/IGBT gate drive circuits,” IEEE Trans. Power Electron., vol. 14, no. 3, pp. 422-430, 1999.
[23] S. C. Tang, S. Y. Hui, and H. S. H. Chung, “Coreless printed circuit board (PCB) transformers with multiple secondary windings for complementary gate drive circuits,” IEEE Trans. Power Electron., vol. 14, no. 3, pp. 431-437, 1999.
[24] S. Y. Hui, S. C. Tang, and H. S. H. Chung, “Optimal operation of coreless PCB transformer-isolated gate drive circuits with wide switching frequency range,” IEEE Trans. Power Electron., vol. 14, no. 3, pp. 506-514, 1999.
[25] Soft Ferrites Data Sheet, Ferroxcube Inc., 2004.
[26] B. K. Bose, Modern power electronics and AC drives., Prentice Hall PTR, 2002.
[27] IR2111 Data Sheet, International Rectifier Inc., 2004.
[28] PIC16F87X Data Sheet, Microchip Technology Inc., 2003.
[29] TPS5420 Data Sheet, Texas Instruments Inc., 2006.
[30] BQ2057 Data Sheet, Texas Instruments Inc., 2004.