| 研究生: |
蔡長亨 Tsai, Chang-Heng |
|---|---|
| 論文名稱: |
以爐石飛灰材料製作混凝土製品之可行性研究 Study on the Application of Slag-Fly Ash Materials to the Concrete Products |
| 指導教授: |
李德河
Lee, Der-Her |
| 共同指導教授: |
林宏明
Lin, Hung-Ming |
| 學位類別: |
碩士 Master |
| 系所名稱: |
工學院 - 土木工程學系 Department of Civil Engineering |
| 論文出版年: | 2017 |
| 畢業學年度: | 105 |
| 語文別: | 中文 |
| 論文頁數: | 114 |
| 中文關鍵詞: | 轉爐石 、燃煤飛灰 、混凝土製品 、混凝土磚 |
| 外文關鍵詞: | basic oxygen furnace slag, fly ashes, concrete products, concrete bricks |
| 相關次數: | 點閱:143 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著時代的推進使工業快速發展,產生的汙染問題日益嚴重,造成環境的破壞與資源的耗竭。砂石原料為經濟建設、公共工程與營建工程不可或缺之材料。但自然生態保護的觀念盛行,天然砂石的開採愈趨困難,故尋找能取代天然砂石的替代材料是現今該努力的目標。轉爐石為煉鋼所產生的工業副產物,具有低磨損、高硬度、高單軸抗壓強度等特性,且組成與天然砂石相似,不僅耐壓、耐磨、膠結性強,為優良之工程材料(中聯資源股份有限公司,2015),若能多加利用爐石材料取代天然砂石,將會對環境帶來極大利益。
本研究以轉爐石作為主體材料,將爐石材料資源化作為主要目標,以轉爐石取代天然砂石作為工程或建築材料,製作混凝土製品之試體並進行一系列試驗瞭解其工程特性與耐久性質,最後以各種混凝土製品之國家標準規範對照試驗結果是否符合規範所要求,評估應用於實務上之可行性。主要結果如下:
(1) 各組轉爐石材料混拌配比之於各環境之長度變化量均符合規範標準,最終以抗壓強度作為選定優良配比之依據。三組流度控制之轉爐石材料混拌優良配比為灰土比0.15轉爐石混拌料取代量50%、灰土比0.25轉爐石混拌料取代量50%及灰土比0.45轉爐石混拌料取代量30%。
(2) 三組優良配比中,灰土比0.15轉爐石混拌料取代量50%之抗彎強度符合高壓混凝土地磚規範中B級抗彎強度標準;灰土比0.25轉爐石混拌料取代量50%與灰土比0.45轉爐石混拌料取代量30%之抗彎強度符合高壓混凝土地磚規範中A級抗彎強度標準。
(3) 灰土比0.45轉爐石混拌料取代量50%以水灰比0.5控制拌合水量加壓成型組之混凝土試體,於養護齡期28天已達高壓混凝土地磚規範B級平均抗壓強度標準以及C級平均吸水率標準。
Time progresses makes industry grow fastly. However, industrial pollutions become increasingly serious and cause environmental destruction and resource exhaustion. Gravel is important to public constructions, economic development and building engineering. The concept of ecological preservation becomes popular makes the natural gravel quarrying become difficult. Finding an alternative is the best way to solve the shortage of natural gravel. Basic oxygen furnace slag (BOF) is by-products of steelmaking. Its feature are high hardness, high abrasion resistance and high strength and it composed like natural gravel. Consequently, basic oxygen furnace slag is good engineering materials. If basic oxygen furnace slag take the place of natural gravel, it will bring great benefit to environment.
Basic oxygen furnace slag is primary material in this research. Our main target is resource of basic oxygen furnace slag. Make concrete products by basic oxygen furnace slag and do a series of tests to realize engineering properties and durability. Comparison test results with Chinese National Standards to realize whether test results meet the requirements. Finally, evaluate the feasibility of the application on concrete products. The main results are as follows:
1. For shrinkage, every fluidity controlled concrete proportion is conform to standards, so we take compression strength of them as reference to select best proportions. The fluidity controlled best proportions as follows: lime-soil ratio 0.15 with replacement of BOF mixture 50%, lime-soil ratio 0.25 with replacement of BOF mixture 50%, lime-soil ratio 0.45 with replacement of BOF mixture 30%.
2. Among best proportions, the proportion of lime-soil ratio 0.15 with replacement amount of BOF mixture 50% conforms to class B bending strength of compressd concrete paving units standard; the proportion of lime-soil ratio 0.25 with replacement amount of BOF mixture 50% and the proportion of lime-soil ratio 0.45 with replacement amount of BOF mixture 30% conforms to class A bending strength of compressd concrete paving units standard.
3. The compressed proportion of lime-soil ratio 0.45, water-cement ratio 0.5 with replacement of BOF mixture 50% conforms to class B compression strength and class C water absorption of compressd concrete paving units standard on day 28.
1. 中國土木水利工程學會,『混凝土及圬工』,科技圖書股份有限公司,1996。
2. 中國鋼鐵股份有限公司,『轉爐石推廣手冊』,台灣,高雄,2000。
3. 王金鐘,『轉爐石作為基底層材料及其工程性質之研究』,博士論文,國立成功大學土木工程系,台灣,台南,2005。
4. 中龍鋼鐵股份有限公司,『2011年中龍企業社會責任報告書』,台灣,台中,2011。
5. 中國鋼鐵股份有限公司,『2015年中鋼企業社會責任報告書』,台灣,高雄,2015。
6. 中聯資源股份有限公司,『2015年中聯企業社會責任報告書』,台灣,高雄,2015。
7. 中龍鋼鐵股份有限公司,『2015年中龍企業社會責任報告書』,台灣,台中,2015。
8. 台灣電力公司電力綜合研究所,『飛灰利用之研究』,台灣電力公司,台灣,台北,1987。
9. 石大鑫,『冶金渣的綜合利用』,中國,四川,礦業技術,1992。
10. 白志清,『工業礦渣取代無筋水泥製品之細粒料應用研究』,碩士論文,國立中央大學土木工程研究所,台灣,桃園,2001。
11. 田永銘,『混凝土鹼質粒料反應防制對策及評估』,交通部台灣區國道新建工程局,2006。
12. 台灣電力公司,『高飛灰摻量混凝土產製技術與應用研究』,台灣電力公司,台灣,台北,2011。
13. 台富水泥製品股份有限公司網站,『產品分類』,2017。http://www.cemestar.com.tw/front/bin/home.phtml
14. 行政院公共工程委員會,『公共工程飛灰混凝土使用手冊』,1999。
15. 李建中,『公共工程砂石供需問題與因應之道』,國立中央大學土木工程學系邀請演講資料,台灣,桃園,1997。
16. 沈永年、王和源、林仁益、郭文田,『混凝土技術』,全華科技圖書股份有限公司,2003。
17. 李培文,『高壓透水磚產製技術之研究』,碩士論文,國立中興大學土木工程研究所,台灣,台中,2003。
18. 余姵如,『磚製品中摻配鈦砂之較佳配比研究』,碩士論文,國立中央大學土木工程研究所,台灣,桃園,2009。
19. 沈詩軒,『爐石材料回脹行為與其改善方法之研究』,碩士論文,國立成功大學土木工程研究所,台灣,台南,2014。
20. 宋少民、劉娟紅,『現代混凝土與水泥問題的思考』,混凝土科技,第10卷,第1期,p.54~p.63,2016。
21. 林平全,『飛灰混凝土』,科技圖書股份有限公司,1989。
22. 周權英,『中鋼爐石用為道路材料評估分析之研究』,碩士論文,國立交通大學交通運輸研究所,台灣,新竹,1990。
23. 林志棟、陳惠峰,『台灣電力公司之火力發電廠產灰概要』,台灣地區飛灰混凝土應用研討會(一)專輯,p.19-1~p.19-8,台灣,桃園,1992。
24. 林志棟,『氣冷轉爐石添加飛灰、底灰應用於基底層材料之研究』,期末報告,國立中央大學土木工程研究所,台灣,桃園,2001。
25. 林梓淞,『以迅速法對鹼-骨材反應確認之研究』,碩士論文,國立成功大學土木工程學系,台灣,台南,2004。
26. 林冠男,『鋼鐵業資源整合應用實例介紹』,中國鋼鐵股份有限公司,台灣,高雄,2012。
27. 林俊傑,『爐石材料應用於控制性低強度材料級配之研究』,碩士論文,國立成功大學土木工程研究所,台灣,台南,2015。
28. 施博仁,『脫硫渣應用於高壓混凝土磚之研究』,碩士論文,國立高雄應用科技大學土木工程與防災科技研究所,台灣,高雄,2009。
29. 陳朝和,『飛灰混凝土使用手冊』,台電公司煤灰處理與利用小組,台灣,台北,1987。
30. 郭淑德,『飛灰資源化』,礦業技術,第4期,p.299~p.315,1991。
31. 郭淑德,『世界各地煤灰利用之近況』,臺電工程月刊,第541期,p.44~p.48,台灣,台北,1993。
32. 郭淑德、賴正義、劉昌民,『臺電火力電廠固態副產物之資源化歷程與展望』,臺電工程月刊,第576期,p.66~p.83,台灣,台北,1996。
33. 許茲華,『輕質骨材混凝土空心磚之製作技術與工程性質研究』,碩士論文,國立中興大學土木工程研究所,台灣,台中,2003。
34. 陳鳳琴,『溫度對鈣礬石生長特性的影響』,建材世界期刊,第3期,p.7~p.9,2011。
35. 陳信榮、張簡國禎,『轉爐石對環境相容性之探討』,轉爐石應用於瀝青混凝土鋪面研討會,台灣,高雄,2011。
36. 陳政宇,『水洗垃圾焚化底渣應用於高壓混凝土磚的可行性評估』,碩士論文,國立高雄應用科技大學土木工程與防災科技研究所,台灣,高雄,2011。
37. 陳志遠,『轉爐石之回脹行為與其改善方法探討』,碩士論文,國立成功大學土木工程研究所,台灣,台南,2012。
38. 陳柏廷,『利用焚化底渣作為混凝土磚粗細骨材之研究』,碩士論文,國立台北科技大學資源工程研究所,台灣,台北,2013。
39. 黃兆龍,『高爐熟料及飛灰材料在混凝土工程之應用』,高爐石與飛灰資源在混凝土工程上應用研討會論文輯,p.23~p.30,台灣,台北,1986。
40. 黃兆龍,『卜作嵐混凝土使用手冊』,財團法人中興工程顧問社,台灣,台北,2007。
41. 程士豪,『模擬煙道氣進行轉爐石碳酸化之研究』,碩士論文,輔英科技大學環境工程與科學系,台灣,高雄,2008。
42. 馮聖伊,『利用椰子殼輕質骨材拌製輕質混凝土磚之研究』,碩士論文,逢甲大學土木工程研究所,台灣,台中,2008。
43. 楊智麟,『煉鋼爐渣於瀝青混凝土之應用』,簡報,中聯資源股份有限公司,台灣,高雄,2009。
44. 劉國忠,『煉鋼爐渣資源化技術與未來推展方向』,環保月刊,第1卷,第4期,p.114~p.136,2001。
45. 賴正義、劉昌民、張玉金,『含煤灰之可流動材料的工程性質研究』,台灣電力公司研究報告,第114期,台灣,台北,1991。
46. 蕭文鎮,『混和粒徑輕質混凝土磚性質及產製技術之研究』,碩士論文,國立中興大學土木工程研究所,台灣,台中,2004。
47. 簡呈至,『穩定焚化飛灰再利用於混凝土磚之研究』,碩士論文,國立台北科技大學資源工程研究所,台灣,台北,2013。
48. ASTM C227-10, “Standard test method for potential alkali reactivity of cement-aggregate combinations (mortar-bar method)”, 2010.
49. ASTM C1260-14, “Standard test method for potential alkali reactivity of aggregates(mortar-bar method)”, 2014.
50. ASTM C618-15, “Standard specification for coal fly ash and raw or calcined natural pozzolan for usein concrete”, 2015.
51. ASTM C311-16, “Standard test method for sampling and testing fly ash or natural pozzolans for use in portland-cement concrete”, 2016.
52. Lenzner, D. and Luedwig, V. “The alkali aggregate reaction with opaline sand stone from schleswig holstein”, Proc. 4th Int. Conf. On Effects of Alkalies in Cement and Concrete, p.11~p.34, 1978.
53. McCoy, W. J., “Effect of hydration on water solubility of ions in portland cement”, Martin Marietta Corp., U.S.A., p.35~ p.46, 1978.
54. Mehta, P.K. and Manmohan, C., “Pore size dstribution and permeability of hardened cement paste” 7th International Conference on Chemistry of Cements, Paris, France, 1980.
55. Mindess, S. and Young, J. F., “Concrete”, Prentice-Hall Inc, Englewood Cliff, New Jersey, 1981.
56. Mehta, P.K., “Concrete structure, properties, and materials”, Prentice-Hall, Englewood Cliff, New Jersey, 1986.
57. Ozyildirim, C., “High performance concrete for transportation structures”, ACI Journal: Concrete International Vol. 15, No. 1, 1993.
58. Stanton, T. E., “The expansion of concrete through reaction between cement and concrete”, Proceeding American Society of Civil Engineers, Vo1.66, p.1781~ p.1811, 1940.
校內:2022-08-31公開