| 研究生: | 呂佳蓓 Lu, Chia-Pei | 
|---|---|
| 論文名稱: | 紙的感性研究-以文化用紙為例 Kansei Study on Paper -Taking Writing and Printing Paper as Example | 
| 指導教授: | 陳國祥 Chen, Kuo-Hsiang | 
| 共同指導教授: | 何俊亨 Ho, Chun-Heng | 
| 學位類別: | 碩士 Master | 
| 系所名稱: | 規劃與設計學院 - 工業設計學系 Department of Industrial Design | 
| 論文出版年: | 2012 | 
| 畢業學年度: | 100 | 
| 語文別: | 中文 | 
| 論文頁數: | 127 | 
| 中文關鍵詞: | 感性工學 、印刷用紙 、視覺 、觸覺 、視觸覺 | 
| 外文關鍵詞: | Kansei Engineering, writing and printing paper, sense of sight, sense of touch, sense of sight & touch | 
| 相關次數: | 點閱:140 下載:5 | 
| 分享至: | 
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 | 
    紙在我們的日常生活中扮演很重要的角色。無論是書籍、雜誌、名片、證書、獎狀或傳單等等,皆是文化用紙的應用層面;然而,卻少有關於紙的感性研究。故本研究之目的為探討文化用紙之感性意象,以及其在觸覺感受、視覺感覺與視觸覺感受上是否有相關性。
    本研究從造紙廠所提供之文化用紙樣本挑選出24種紙品做為實驗樣本,並請20位具有紙的專業知識之專家挑選適合用來描述紙類之視覺與觸覺感性語彙。由30位受測者進行三階段的實驗,分別為觸覺實驗、視覺實驗與視觸覺實驗,在所提供的意象尺度上評分。以感性工學的理論基礎,將視覺感受、觸覺感受與視觸覺感受數值化。
    應用複迴歸分析探討紙的屬性包括:基重、厚度、光澤度、平滑度、不透明度、白度及鬆度,在觸覺感受、視覺感受與視觸覺感受之於「優質的」、「柔和的」與「專業的」三個感性意象上之影響程度。結果得到,觸覺上,厚度越厚越有優質的感覺。厚度越薄,平滑度越低,鬆度越高時,越有柔和的感覺。厚度越厚的紙,越有專業的感覺。視覺上,不透明度越高越有優質的感覺。平滑度越低時,越有柔和的感覺。不透明度越高的紙,越有專業的感覺。視觸覺上,不透明度越低時,越有柔和的感覺。
    在「優質的」與「柔和的」意象中,觸覺與視觸覺之意象感受具有顯著相關,視覺與視觸覺具有顯著相關;在「專業的」意象中,觸覺、視覺、視觸覺之感性意象皆有顯著之相關性。實驗的結果可作為紙的製造及使用上的參考。
    Paper is commonly used in our daily life. It plays important roles in many aspects of life. However, there are only a few studies related to paper. Hence, this study tried to construct the perceptual images of writing and printing paper. As there are numerous categories of paper, this study limited the scope to the most frequently used kinds of paper for printing industry. 
    This study adopted Kansei Engineering method to explore the relationships between paper and the people’s emotion. Three Kansei words and 24 paper samples were used in the experiment. 30 participants were asked to measure the intensity level of feeling for sense of touch, sense of sight and sense of touch & sight toward the 3 Kansei words against each sample during the experiments. 
    The results showed as follows. For the sense of touch, the higher degree of thickness the more “quality” was felt. The higher degree of bulk and the lower degree of thickness and smoothness, the more “soft” was felt. The higher degree of thickness the more “professional” was felt. For the sense of sight, the higher degree of opacity the more “quality” was felt. The lower degree of smoothness the more “soft” was felt. The higher degree of opacity the more “professional” was felt. As for the sense of touch & sight, the lower degree of opacity the more “soft” was felt.
    For the Kansei images of “quality” and “soft”, the sense of touch and the sense of touch & sight are highly correlated. For the image of “professional”, the sense of touch, the sense of sight and the sense of sight & touch are correlated.
    The results of this study, hopefully, can serve as references to the paper industry and printing industry, as well as books designers.
中文部分:
1. 王則眾、林嘉俊(2006),觸覺形態特徵對操作方向認知之關係,設計學報,13卷1期 。
2. 吳柏增(2006),「使用者對滑鼠塗裝質感之認知研究」,國立台灣科技大學設計研究所碩士論文。
3. 呂明泉(2002),「觸覺與視覺對意象差異研究—以塑膠材質咬花為例」,國立成功大學工業設計研究所碩士論文。
4. 李娟娟(2007),「現代書籍設計中視、聽、觸、嗅、味五感一體研究」,湖南師范大學碩士學位論文。
5. 李祥峰(2007),「論包裝設計中的觸覺表現」,北京服裝學院碩士學位論文。
6. 林啓昌(1997)編著,造紙工程與印刷用紙,台灣,五洲。
7. 林慧宜(2006),「紙張鬆度之研究」,國立中興大學森林學研究所碩士學位論文,2006。
8. 柯超茗(1997),「材料視覺與觸覺質感意象的研究」,國立雲林技術學院工業設計技術研究所碩士論文。
9. 胡新明(2006),「產品設計中感性的認知與表達探究」,武漢理工大學碩士學位論文。
10. 郭泓伶(2010),「以擬態語彙探討材質視觸覺感性意象之研究」。國立成功大學工業設計研究所碩士論文。
11. 陳安君(2010),「產品視觸覺複合之感性意象研究」,國立成功大學工業設計研究所碩士論文。
12. 劉萍(2007),「觸摸材質—書籍設計材料的觸感研究」,湖南師范大學碩士學位論文。
13. 蔡承諭(2004),「視、觸覺之形態與材質對產品意象影響研究」,國立雲林科技大學工業設計系碩士班碩士論文。
英文部分:
1. Choi K. M, and Jun C. R. (2007), “A systematic approach to the Kansei factors of tactile sense regarding the surface roughness,” Applied Ergonomics, Vol.38, ISSN 0003-6870, pp. 53–63, 2007. 
2. Dinse, H.R. (2008), “Haptic banknote design, In Human Haptic Perception: Basics and Applications” (Eds Martin Grunwald), Birkhäuser Basel, pp 537-547. 
3. Holik, H. (Ed.) (2006), Handbook of Paper and Board, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany.
4. Nagamachi, M. (2002), “Kansei engineering as a powerful consumer-oriented technology for product development”, Applied Ergonomics, Vol.33 (3), pp 289–294. 
5. Nagamachi, M. (1995), “Kansei Engineering: A new ergonomic consumer-oriented technology for product development”, International Journal of Industrial Ergonomics, Vol.15 (1), pp. 3–12, 1995. 
6. Summers I. R., Irwin R.J., and Brady A.C. (2008), “Haptic discrimination of paper, In Human Haptic Perception: Basics and Applications” (Eds Martin Grunwald), Birkhäuser Basel, pp 525-535, 2008.
網站部分:
1. 福慶紙業: http://www.buypaper.com.tw
2. 樹火紀念紙博物館: http://www.suhopaper.org.tw/chinese/default.htm
3. 永豐餘造紙股份有限公司: http://www.yfy.com.tw/
4. 埔里廣興紙寮: http://www.taiwanpaper.com.tw/
5. 扎誌 http://blog.udn.com/jason080/
6. 檔案管理局 兒童版 http://va2.archives.gov.tw/kid/kid.html
7. 維基百科 紙 http://zh.wikipedia.org/w/index.php?title=%E7%BA%B8&variant=zh-tw#_note-5