本次研究以計算流體力學為工具，進行T型管微混合器數值模擬實驗，探討T型管主流道壁上凸出結構對微混合器混合效率的影響，並以田口方法設計實驗參數組合，以較精簡的實驗次數找尋在低雷諾數下凸出結構之較佳幾何參數設計。

In this research numerical simulations of the flow fields of T-tube micromixers are performed using a commercial CFD software. The effects of organized convex wall structures on the mixing efficiency of the micromixer are studied. Taguchi Method has been used to set up the numerical experiments in search of a set of geometric parameters of the convex wall structure that yields good mixing efficiency at low Reynolds number regime.

[1] Kumar, V., Parashivoiu, M., and Nigam, K. D. P., “Sigle-Phase fluid flow and mixing in microchannels,” Chemical Engineering Science, No. 66, pp. 1329-1373, 2011.
[2]Glasgow, I., and Aubry, N., “Enhancement of Microfluidic Mixing Using Time Pulsing,” Lab on a Chip, No. 3, pp. 114-120, 2003.
[3]黎康熙，利用入口脈動流之主動式微混合器研究，國立成功大學航空太空研究所論文，2006年。
[4]Wu, H. Y., and Liu, C. H., “A Novel Electrokinetic Micromixer,” The 12th international Conference on Solid State Sensors, Actuators and Microsyetems, Boston, June 8-12, 2003.
[5] Tang, Z., Hong, S., Djukic, D., Modi, V., West, A.C., Yardley, J.,and Osgood, R.M., “Electrokinetic flow control for composition modulation in a microchannel,” Journal of Micromechanics and Microengineering, No. 12, pp. 870-877, 2002.
[6]郭勝欣，浮力對T型管微混合器效率之影響，國立成功大學航空太空研究所論文，2010年。
[7]Schwesinger, N., Frank, T., and Wurmus, H., “A Modular micro-fluidic System with an Integrated Micromixser” Journal of Micromechanics and Microengineering, Vol. 6, No. 1, pp. 99-102, 1996.
[8]Lin, C. H., Tsai, C. H., and Fu, L. M., “A rapid three-dimensional vortex micromixer utilizing self-rotation effects under low Reynolds number conditions,” Journal of Micromechanics and Microengineering, No. 15, pp. 935-943, 2005
[9]廖崇耀，一種依擴散現象而設計之被動式微混合器，國立成功大學航空太空研究所論文，2007年。
[10]陳安邦，被動式微混合器設計之數值研究，國立成功大學航空太空研究所論文，2008年。
[11]諶佳佳，被動式微混合器之數值模擬，國立成功大學航空太空研究所論文，2010年。
[12]Strook, A. D., Deringer, S. K. A., Mezic, L., Stone, H. A., and Whitesides, G. M., “Chaotic Mixer For Microchannel” Science, Vol. 295, pp. 647-651, 2002.
[13]Sudarsan, A. P., and Ugaz, V. M., “Multivortex micromixing,” Proceedings of the National Academy of Sciences, Vol. 103, No. 19, pp. 7228-7233, 2006.
[14]Virginie, M., Jacques, J., and Hubert, H. G., “Mixing Processes in a Zigzag Microchannel: Finite Element Simulations and Optical Study,” Analytical Chemistry, NO. 74, pp. 4279-4286, 2002.
[15]Yang, J. T., Fang, W. F., and Tung, K. Y., “Fluids mixing in devices with connected-groove channels,” Chemical Engineering Science, No. 63, pp. 1871-1881, 2008.
[16]Wang, H., Iovenitti, P., Harvey, E., and Masood, S., “Numerical investigation of mixing in microchannels with patterned grooves,” Journal of Micromechanics and Microengineering, No. 13, pp. 801-808, 2003.
[17]張季娜，羅仕勇，宋振昌，蔡彰文，陳世璉，莊泰旭，邱鎮宏，高述崙，鍾清章，田口式品質工程導論，台北，中華民國品質管制學會，1989年。
[18]Veenstra, T. T., Lammerink, T. S. J., Elwenpoek, M. C., and Berg, A. V. D., “Characterization Method For A New Diffusion Mixer Applicable In Micro Flow Injection Analysis System” Journal of Micromechanics and Microengineering, No. 9, pp. 199-202, 1999.