隨著科技的進步及成熟，積層製造的應用也越來越廣，其中以材料為金屬的選擇性雷射熔融更是具有相當大的潛力，無論是航太業的高精密度或是生醫產業的客製化等特色皆具備此能力，另外，在許多傳統產業無法加工的材料與產品都得已實現。但也因為金屬粉末材料加工的限制性導致:製造成本高、製程時間長、參數控制嚴苛等原因而無法普及，其中以參數控制需耗費龐大資源於每種材料；故希望透過本研究縮短其參數最佳化過程，並透過吸收率的分析來觀察其粉末與製程參數之間的關係，使得參數最佳化過程所耗費資源減少。
本研究開發金屬粉末隨機落球模型，建立其邊界條件結合堆積判定後，利用Matlab演算可獲得各種類型或幾何的金屬粉末堆積模型，並透過切層演算獲得金屬粉末層，並且將金屬粉末資訊透過Macros程式編寫匯入光學軟體Zemax，透過Zemax之光線追蹤分析其金屬粉末於高能量之平行雷射光束下的吸收率。除此之外，也將選擇性雷射熔融之振鏡掃描系統建立於Zemax之吸收率分析，考慮振鏡掃描系統之桶型畸變與枕型畸變所產生之光點誤差及掃描入射角的不同之吸收率分析，並且比較未使用振鏡掃描系統。比較結果後，其在振鏡系統之吸收率影響可以忽略不計。其吸收率分析了不同光束半徑、不同粉末材料、不同粉末粒徑與分布對吸收率之影響並且分析其粉末總體吸收率，將吸收率以微觀角度分為散射吸收與直接吸收，並且定義其最佳的切層厚度以供實驗作為基準，從模擬結果發現，其切層厚度建議於粉末之中心粒徑附近為主。為了驗證此模擬模型，於SLM機台中製作四種不同切層厚度的正方體塊材，由實驗結果發現，使用其模擬模型之建議的切層厚度，具有較佳的尺寸、表面粗糙度與緻密度。

With the mature advancement of science and technology, application of the additive manufacturing is more and more widely. Among them, the metal material in selective laser melting (SLM) has a great potential in the future. Because of high cost for manufacturing, long production cycle and strict parameters in controlling etc, these reasons cause the SLM not to be universal. So, this thesis studis on the optimized process on metal powders by absorptivity and scattering effect.
By the raining model, any size distribution and the type of material for the deposition of metal powders can be simulated. The information of metal powders is imported into Zemax by program coding of Macro and analyzing of the absorptivity of metal powders under high-energy laser beam. Also, galvanometric scanning system in SLS was simulated in Zemax to analyze absorptivity of energy from the metal powders. The results between using galvanometric scanning system of SLM and without using the one of SLM are compared each other. It is found that the effect of galvanometric scanning system to the absorptivity of metal powders can be neglected. In order to analyze the effect of laser spot size, powder particle size distributions, powder material on the absorptivity of powder bed, and the non-sequential ray tracing simulations were implemented in Zemax. It is found that in the case of powder particles size with Gaussian distribution, the suggested powder layer thickness is around the value of the mean size of powder particles. In order to verify this simulation model, the parts with different layer thickness were manufactured by SLM machine. In experiments, it is found that by using the suggested powder layer thicnkess from simulation, the quality of final parts in terms of packing density and surface rougness is better than the other values of powder layer thickness.

Argento, C. and Bouvard, D., “A ray tracing method for evaluating the radiative heat transfer in porous media,” Int. J. Heat Mass Transfer, Vol. 39, pp. 1380–3175, (1996).

Boley, C., Khairallah, S., and Rubenchik, A., “Calculation of laser absorption by metal powders in additive manufacturing,” Applied optics, Vol. 54, pp. 2477-2482, (2015).

Chen, M. F. and Chen, Y. P., “Compensating technique of field-distorting error for the CO2 laser galvanometric scanning drilling machines,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 1114–1124, (2007).

Chen, M. F., Chen, Y. P., Hu, C. W., and Chen, C. C., “Method of analyzing the singlet F-Theta scan lens for laser drilling system,” Key Engineering Materials, Vol. 364, pp. 521-526, (2008).

Finney, J.L., "Random packings and structure of simple liquids. 1. Geometry of random close packing," Proc. R. Soc. Ser. A 319, 479, (1970).

Fischer, P., Romano, V., Weber, H.P., Karapatis, N.P., Boillat, E., and Glardon, R., “Sintering of commercially pure titanium powder with a Nd: YAG laser source,” Acta Mater. 51, pp. 1651–1662, (2003).

Fischer, R. E. and Tadic-Galeb, B., Optical system design, Mc Graw Hill, Inc., New York, pp. 211-213, (2000).

Fu, G. and Dekelbab, W., “3-D random packing of polydisperse particles and concrete aggregate grading,” Powder Technology, Vol. 133, pp. 147-155, (2003).

Jodrey, W. and Tory, E., “Computer simulation of close random packing of equal spheres,” Physical review A, Vol. 32, p. 2347, (1985).

Kochan, D., Solid free form manufacturing advanced rapid prototyping, Elsevier Science Inc., Germany, (1993).

Kruth, J.-P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., and Lauwers, B., “Selective laser melting of iron based powder, ” Proc. of the 14th Int. Symp. on Electromachining, ISEM XIV, Vol. 2, (2004).

Kruth, J.-P., Vandenbroucke, B., Van Vaerenbergh, J., and Mercelis, P., “Benchmarking of different SLS/SLM processes as rapid manufacturing techniques,” Proc. PMI, Gent, CD-Rom, (2005).

Meakin, P. and Jullien, R., “Restructuring effects in the rain model for random deposition,” Journal de Physique, vol. 48, pp. 1651-1662, (1987).

Moser, D., Pannala, S., and Murthy, J., “Computation of effective radiative properties of powders for selective laser sintering simulations,” Journal of the Minerals, Metals and Material Society, Vol. 67, pp. 1194-1202, (2015).

Pedrotti, F. L. and Pedrotti, L. S., Introduction to optics, 2nd edition, New Jersey: Prentice Hall, (1993).

Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., and Kellomäki, M., “A review of rapid prototyping techniques for tissue engineering purposes,” Annals of Medicine, Vol. 40, pp. 268-280, (2008).

Rahaman, M. N., Ceramic Processing and Sintering, Marcel Dekker, New York, (1995).

Hashmi, S., Comprehensive Materials Processing, Elsevier., Newnes, pp. 93-134, (2014).

Shi, Y. and Zhang, Y., “Simulation of random packing of spherical particles with different size distributions,” Applied Physics A, Vol. 3, pp. 621-626, (2008).

Streek, A., Regenfuss, P., and Exner, H., “Fundamentals of energy conversion and dissipation in powder layers during laser micro sintering,” Phys. Procedia, Vol. 41, pp. 858–869, (2013).

Tolochko, N.K., Khlopkov, Y.V., Mozzharov, S.E., Ignatiev, M.B., Laoui, T., and Titov,V.I., “Absorptance of powder materials suitable for laser sintering,” Rapid Prototyping J., 6 (3) pp. 155–160, (2000).

Tran, H. C., Lo, Y. L., and Huang, M. H., “Analysis of scattering and absorption characteristics of metal powder layer for selective laser sintering,” Revised for IEEE/ASME Transactions on Mechatronics, Jan. 2016.

Wang, X., Laoui, T., Bonse, J., Kruth, J. P., Lauwers, B., and Froyen, L., “Direct selective laser sintering of hard metal powders: experimental study and simulation,” The International Journal of Advanced Manufacturing Technology, Vol. 19, pp. 351-357, (2002).

Wen, S. F., Shi, Y. S., Xie, J., and Cai, D. S., “Study on key technology for 3-D galvanometric scanners,” Laser Technology, Vol. 33, pp. 377-380, (2009).

Zhang, B., Liao, H., and Coddet, C., “Effects of processing parameters on properties of selective laser melting Mg–9% Al powder mixture,” Materials and Design, 34, pp. 753–758, (2012).

Zhou, H. L. and Wang, L. Q., “A fast algorithm for rectification of optical lens image distortion,” Journal of Image and Graphics, Vol. 10, pp. 1131-1135, (2003).

Zhou, J., Zhang, Y., and Chen, J., "Numerical simulation of random packing of spherical particles for selective laser sintering applications," ASME 2008 International Mechanical Engineering Congress and Exposition, pp. 327-336, (2008).

永田信一さん, "Analyze the relationship between the quantity of light and the statistical error in the Zemax," Zemax User Support Forum, Japan, (2010).