簡易檢索 / 詳目顯示

回結果列表
研究生： 陳旻鴻
Chen, Min-Hung
論文名稱： 交流發光二極體特性之研究
Study of Characteristics of AC LEDs
指導教授： 林志隆
Lin, Chih-Lung
梁從主
Liang, T. J.
學位類別： 碩士
Master
系所名稱： 電機資訊學院 - 電機工程學系碩士在職專班
Department of Electrical Engineering (on the job class)
論文出版年： 2009
畢業學年度： 97
語文別： 中文
論文頁數： 82
中文關鍵詞： 發光二極體
外文關鍵詞： LED
相關次數： 點閱：54  下載：1 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本論文以交流弦波的方式驅動紅光、綠光及藍光發光二極體，並探討頻率、電流及溫度對發光二極體光電特性的影響。結果發現：(1) 頻率會改變發光二極體的光電特性。(2) 驅動電流值大小會影響發光二極體之主波長與色偏。(3) 溫度增加會造成主波長偏移與發光效率下降。使用弦波振幅調變方式來調光時，會使得RGB LED的色度坐標值改變，造成色偏。本文提出正弦脈波調變的方法，用高頻正弦波和低頻脈波之脈寬來調整發光二極體之光輸出，以改善色偏。

    By applying the sine wave to drive the red light, green light, and blue light LEDs, this thesis examines the effectiveness of the frequency, current, and temperature on the optoelectronic characteristics. Results show that: (1) The optoelectronic characteristics of LEDs can be changed by adjusting the frequency. (2) The driving current affects the dominant wavelength and color shift of the LED output. (3) Increasing temperature causes dominant wavelength shifting and luminous efficacy decay. By dimming the LED light output with sine wave amplitude modulation, it changes the chromaticity coordinates of the RGB LEDs, which in turn causes a color shift. Color shifting defects can be overcome by dimming the LEDs with a high frequency sine-wave and low frequency pulse width modulation method.

    中文摘要…………………………………………………………………Ⅰ 英文摘要…………………………………………………………………Ⅱ 誌 謝……………………………………………………………………Ⅲ 目 錄……………………………………………………………………Ⅳ 表目錄……………………………………………………………………Ⅸ 圖目錄……………………………………………………………………XI 第一章 緒論………………………………………………………………1 1.1 研究背景…………………………………………………………1 1.2 研究目的與方向…………………………………………………4 1.3 論文大綱…………………………………………………………4 第二章 發光二極體與照明用語介紹……………………………………5 2.1 LED發光原理……………………………………………………5 2.2 LED發光材料與能隙……………………………………………6 2.3 LED結構…………………………………………………………6 2.4 LED發光效率……………………………………………………7 2.5 LED電氣特性……………………………………………………9 2.5.1 LED I-V特性……………………………………………9 2.5.2 LED電容效應……………………………………………11 2.6 LED溫度特性……………………………………………………12 2.6.1 溫度與電壓之關係……………………………………12 2.6.2 溫度與發光效率之關係………………………………13 2.6.3 溫度與主波長之關係…………………………………13 2.7 光度學名詞介紹………………………………………………14 2.7.1 光通量…………………………………………………14 2.7.2 照度……………………………………………………15 2.7.3 發光強度………………………………………………16 2.7.4 輝度……………………………………………………16 2.8 色度學相關知識介紹…………………………………………17 2.8.1 CIE 1931色度座標系統………………………………17 2.8.2 CIE1964/CIE1976色度座標系統………………………19 2.8.3 混光原理及方法………………………………………20 2.8.4 色溫……………………………………………………23 2.8.5 主波長…………………………………………………24 2.8.6 色域……………………………………………………25 2.8.7 色純度…………………………………………………26 2.8.8 演色性…………………………………………………27 第三章 實驗量測系統與LED測試方法…………………………………28 3.1 實驗量測系統…………………………………………………28 3.1.1 光特性測試系統………………………………………29 3.1.2 溫度監控量測系統……………………………………32 3.1.3 電氣特性量測系統……………………………………32 3.1.4 LED驅動系統…………………………………………33 3.2 發光二極體規格………………………………………………33 3.3 發光二極體測試方法…………………………………………35 第四章 雙向LED量測結果分析與混色調光策略………………………36 4.1 頻率與LED發光特性之關係……………………………………36 4.1.1 頻率對光通量的影響…………………………………36 4.1.2 頻率對發光效率的影響………………………………37 4.1.3 頻率對主波長的影響…………………………………39 4.1.4 頻率對色純度的影響…………………………………40 4.1.5 頻率對色偏的影響……………………………………42 4.2 電流與LED發光特性之關係……………………………………43 4.2.1 電流對光通量的影響…………………………………43 4.2.2 電流對發光效率的影響………………………………45 4.2.3 電流對主波長的影響…………………………………47 4.2.4 電流對色純度的影響…………………………………49 4.2.5 電流對色偏的影響……………………………………51 4.3 溫度與LED發光特性之關係……………………………………52 4.3.1 溫度對光通量的影響…………………………………52 4.3.2 溫度對發光效率的影響………………………………53 4.3.3 溫度對主波長的影響…………………………………54 4.3.4 溫度對色純度的影響…………………………………56 4.3.5 溫度對色偏的影響……………………………………57 4.4 漣波對LED發光特性之關係……………………………………58 4.4.1 漣波對光通量的影響…………………………………58 4.4.2 漣波對主波長的影響…………………………………60 4.4.3 漣波對色偏的影響……………………………………62 4.4.4 漣波對白光LED的影響…………………………………62 4.5 RGB雙向LED模組之混色調光策略……………………………64 4.5.1 弦波振幅調變與正弦脈波調變驅動之發光特性比較…65 4.5.1.1 主波長…………………………………………66 4.5.1.2 色偏……………………………………………68 4.5.1.3 光通量…………………………………………71 4.5.2 弦波振幅調變與正弦脈波調變驅動之混色調光比較…72 第五章 結論及未來研究方向…………………………………………76 5.1 結論……………………………………………………………76 5.2 未來研究方向…………………………………………………76 參考文獻…………………………………………………………………78

    [1] 蔡亦真，「高亮度LED應用抬頭」，2007熱門光電產業年鑑，第50-57頁，中華民國九十六年。
    [2] 經濟部能源局，「我國節約能源發展目標與策略」，行政院產業科技策略會議，第19頁，中華民國九十六年。
    [3] B. Ackermann, V. Schulz, C. Martiny, A. Hilgers, and X. Zhu, “Control of LEDs,“IEEE Industry Applications Conference, vol. 5, pp.2608-2615, Oct. 2006.
    [4] P. Pinho, E. Tetri, and L. Halonen, “Synergies of Controller-Based LED Drivers and Quality Solid-State Lighting,” IEEE - Research in Microelectronics and Electronics, pp. 405-408, Sep. 2006.
    [5] 甘明吉，”Diamond and related materials for the thermal management of high power LEDs”，2008顯示光源研討會，第107-124頁，中華民國九十七年。
    [6] P. N. Grillot, M. R. Krames, H. Zhao, and S. H. Teoh, “Sixty Thousand Hour Light Output Reliability of AlGaInP Light Emitting Diodes,”IEEE Trans. on Device and Materials Reliability, vol. 6, no. 4, pp.564-574, Dec. 2006.
    [7] A. Okuno, Y. Miyawaki, N. Oyama, and W. Dongxu,“Unique White LED Systems,”IEEE EMAP, pp. 1-5, Dec. 2006.
    [8] J. L. Kuo, T. Y. Wang, and J. D. Lee“Investigation on Brightness Uniformity for LED Array Display by Using Current-Based Bias Voltage Compensation,” IEICE Trans. Electron., vol.E88–C, no. 11, Nov. 2005.
    [9] L. B. Chang, Y. H. Chang, and M. J. Jeng, “ Light Output Improvement of InGaN-Based Light-Emitting Diodes by Microchannel Structure,”IEEE JNL . on Photonics Technology Letters, vol 19, no. 15, pp.1175-1177, Aug. 2007.
    [10] W. Schmid, M. Scherer, C. Karnutsch, A. Plobl, W. Wegleiter, S. Schad, B. Neubert, and K. Streubel, “High-efficiency red and infrared light-emitting diodes using radial outcoupling taper,“ IEEE JNL. on Quantum Electron,vol. 8, 2002.
    [11] H. J. Chiu and S. J. Cheng, “LED Backlight Driving System for Large –Scale LCD Panels,” IEEE Trans. on Industrial Electronics, vol. 54, no. 5, pp.2751-2760, Oct. 2007.
    [12] 沈志隆，「簡易之發光二極體串列旁通電路」，中華民國新型專利，專利號碼:M301408，中華民國九十五年。
    [13] D. A. Steigerwald, J. C. Bhat., D. Collins, R. M. Fletcher, M. O. Holcomb, M. J. Ludowise, P. S. Martin, and S. L. Rudaz, “ Illumination with solid state lighting technology,” IEEE JNL. vol. 8, pp. 310-320, Mar. 2002.
    [14] Lumileds Corporation Luxeon reliability Application Brief AB29,3,2007
    [15] K. James, “BI-DIRECTIONAL LED-BASED LIGHT,” US Paten 7,053,560 Bl, May. 2006.
    [16] H. Jiang and J. Lin,” LIGHT EMITTING DIODES FOR HIGH AC VOLTAGE OPERATION AND GENERAL LIGHTING,” US Paten 7,213,942 B2, May. 2007.
    [17] Seoul Semiconductor, http：//www.seoulsemicon.com/en/product/prd/acriche.asp
    [18] III-N TECHNOLOGY, INC., http：//www.3N-Tech.com/
    [19] Industrial Technology Research Institute, http：//www.itri.org.tw/eng/
    [20] R. F. Pierret, Semiconductor Device Fundamentals, second edition, Addison-Wesley, 1996.
    [21] F. Yun, M. A. Reshchikov, L. He, T. King, H. Morkoc, S. W. Novak, and L. Wei ,“Energy band bowing parameter in Al(x)Ga(1-x)N alloys,” J. Appl. Phys., vol. 92, Jan. 2002.
    [22] K. Streubel, N. Linder, R. Wirth, and A. Jaeger, “ High-brightness AlGaInP light-emitting diode,” IEEE JNL. on Quantum Electronics, vol. 8, no. 2, Mar. 2002.
    [23] 洪瑞華，「高效率LED外部取光技術」，2008顯示光源研討會，第27-32頁，中華民國九十七年。
    [24] L.W. Ji, Y.K. Su, S.J. Chang, S.C. Hung, C.S. Chang and L.W. Wu, “Nitride-based light-emitting diodes with InGaN/GaN SAQD active layers,” IEE Proc.-Circuits Devices Syst., Vol. 151, No. 5, Oct. 2004.
    [25] N. D. Stoyanov, B. E. Zhurtanov, A. N. Imenkov, A. P. Astakhova, M. P. Mikhaĭlova and Yu. P. Yakovlev, “High-efficiency LEDs based on n-GaSb/p-GaSb/ n -GaInAsSb/ P-AlGaAsSb type-II thyristor heterostructures, ” Semiconductors, vol. 41, no. 7, Jul. 2007.
    [26] T. Fujii, Y. Gao, R. Sharma, E. L. Hu, S. P. DenBaars, and S. Nakamura, “Increase in the extraction efficiency of GaN-based light-emitting diodes via surface roughening,” Appl. Phys. Lett., vol. 84, 2004.
    [27] G. Sauerlander, D. Hente, H. Radermacher, E. Waffenschmidt, and J. Jacobs, “Driver Electronics for LEDs,” IEEE Industry Applications Conference, vol. 5, pp.2621-2626, Oct. 2006.
    [28] S. Winder, Power Supplies for LED Drivers, Elsevier, 2008.
    [29] F. N. Poon, M. H. Pong, and J. C. Liu, “High efficiency driver for color light emitting diodes,”European Pattent, Application number： 02027332.2, July 2007.
    [30] D. A. Neamen, Semiconductor Physics and Devices, third edition, McGraw-Hill, 2002.
    [31] E. H. Rhoderick and R. H. Williams, Metal-Semiconductor Contacts, Clarendon Press, 1988.
    [32] J. M. Shah, Y.-L. Li, Th. Gessmann, and E. F. Schuberta, “ Experimental analysis and theoretical model for anomalously high idealityfactors .n.2.0. in AlGaNÕGaN p-n junction diodes,” J. Appl. Phys. vol. 94, no.4, Aug. 2003.
    [33] 林亮，「白色LED加速老化的特性」，發光學報，第26卷，第5期，第617-621頁, 中華民國九十四年。
    [34] Agilent Tchnology, http://cp.literature.agilent.com/litweb/pdf/5952-1431.pdf
    [35] Y. P. Varshni, “ Temperature dependence of the energy gap in semiconductors,” Physica, vol. 34, no. 149, 1967.
    [36] E. F. Schubert, Light-Emitting Diodes, second edition, Cambridge, 2006.
    [37] CIE Free Documents for Download, http://www.cie.co.at/main/freepubs.html
    [38] G. Wyszecki and W.S. Stiles, Color Science , Second Edition, Wiley, 2000.
    [39] J. Schanda, Colorimetry： Understanding the CIE System, Wiley, 2007.
    [40] H. S. Fairman, M. H. Brill, and H. Hemmendinger, “How the CIE 1931 Color-Matching Functions Were Derived from the Wright–Guild Data,” Color Research and Application, vol. 22, no. 1, Feb. 1997.
    [41] 史光國，「半導體發光二極體及固態照明」，全華科技圖書，中華民國九十六年。
    [42] S. Chhajed, Y. Xi, Y. L. Li, T. Gessmann, and E. F. Schubert, “Influence of junction temperature on chromaticity and color rendering properties of trichromatic white light source based on light emitting diodes,” J. Appl. Phys. 97, 054506, Feb.2005.
    [43] 葉峻毅，「發光二極體光學測試技術發展」，量測資訊，第98期，第28-35頁， 中華民國九十三年。
    [44] Light Ports Inc., http://www.lightports.com/
    [45] B&W Tek, Inc., http://www.bwtek.com/Spectrometers/BRC112E-V.php
    [46] Motech Industrial Inc., http://www.motech.com.tw/chinese/object/instruments/
    [47] Tektronix, Inc., http://www.tek.com/
    [48] LeCroy Corporation, http://www.lecroy.com/tm/products/scopes/wavejet/
    [49] H. Hemmati, Deep space optical communications, Wiley, 2006.
    [50] ProLight Opto Technology Corporation, http://www.prolightopto.com/

    下載圖示 校內：2012-09-01公開
    校外：2014-09-01公開
    QR CODE