| 研究生: |
莊雅鈞 Chuang, Ya-Chin |
|---|---|
| 論文名稱: |
半導體廠房水資源整合與環境績效指標 Water Resource Integration and Environmental Performance Indicators for Semiconductor Plants |
| 指導教授: |
張行道
Chang, Andrew. S. |
| 學位類別: |
碩士 Master |
| 系所名稱: |
工學院 - 土木工程學系 Department of Civil Engineering |
| 論文出版年: | 2014 |
| 畢業學年度: | 102 |
| 語文別: | 中文 |
| 論文頁數: | 82 |
| 中文關鍵詞: | 用水系統 、水資源績效架構 、環境績效指標 、水資源整合 、半導體廠房 |
| 外文關鍵詞: | water system, water performance framework, environmental performance indicators, water integration, semiconductor plant |
| 相關次數: | 點閱:425 下載:16 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
水資源議題愈來愈重要,國內高科技廠近年陸續投入人力與技術,希望提高水資源使用效率例如提高水回收率,減少對自來水的依賴。然而科學園區目前只規定製程回收率、全廠回收率、全廠排放率三個水量指標,及廠房排放廢水水質標準。此等要求對於公司及廠房的管理有所不足,不能代表整體的用水成效或環境績效。如何整體考量水資源,利用製程回收水並有效管理,是一重要課題。
本研究探討半導體廠房水資源整合與環境績效指標,分析廠房用水,考量自來水、製程廢水、回收水、排放污水等,提出水資源使用整合方向,訂定相關環境績效指標,衡量水資源整合績效,使水資源使用更有效率。
水資源績效架構包括輸入、製程用水、次級用水、輸出四部分,共19個指標,其中水量指標有13個。研究發現廠房輸入、輸出端的水量指標如自來水量和總排放廢水量,和產能直接相關,可用L/cm2為單位,較易和相關規範或其他廠房比較績效。其餘指標和水系統操作、技術較相關,因此不同廠房會有差異,例如製程回收率、純水系統造水率,可和自來水量或其他用水量相比,以百分比為單位。
水質指標有6個,直接關係著良率和回收水多寡與水質者為重點,例如超純水、廢水處理水質指標。本研究找出其重要的水質項目,分析效益並給分,但像超純水水質,花更多成本使水質項目超過標準並無實質效益,因此只須符合標準即可。水量、水質指標依其節水量大小、重要性、有無相關規定要求等給予不同權重,彙總得整體指標分數為90、87分,兩者平均為89分,因此案例半導體廠整體水資源使用績效佳。
本研究依不同類別,發展出更多水環境指標,並探討各指標間關聯,組成參數的合理性及半導體廠房平均績效應為多少,以較完整的評估各用水單元的績效。然而由於資料收集不易,某些指標在評分標準可再精進。
This study analyzed water usage of semiconductor plants, including tap water, wastewater process, recycled water, and wastewater discharge. Besides, it addressed the integration of water usage. In order to make water usage more efficient, this study formulated a water-related framework and environmental indicators to measure the overall water performance. The framework incorporates important water quantity and quality issues to consist of 19 indicators in system input, process, and output stages.
英文文獻
1. Burkhard, R., Deletic, A., and Craig A. (2000). “Techniques for water and wastewater management:a review of techniques and their integration in planning.” Journal of Urban Water, Vol. 2, pp. 197~221.
2. Ding, G.K.C. (2008). “Sustainable construction-the role of environmental assessment tools.” Journal of Environmental Management, Vol. 86, pp. 451~464.
3. Gilles, D.G. and Loehr, C.R. (1994). “Waste generation and minimization in semiconductor industry.” Journal of Environmental Engineering, ASCE, Vol. 120, No. 1, pp. 72~86.
4. Huang, C.J., Yang, B.M., Chen, K.S. (2011). “Application of membrane technology on semiconductor wastewater reclamation: A pilot-scale study.” Journal of Desalination, Vol. 278, pp. 203~210.
5. International Technology For Semiconductors (ITRS) (2011). Environment, Safety, and Health. http://www.itrs.net/, accessed on 2014/01/12.
6. Kuan, W.H., and Hu, C.Y. (2009). “Chemical evidences for the optimal coagulant dosage and PH adjustment of silica removal from chemical mechanical polishing (CMP) wastewater.” Journal of Colloids and surfaces: Physicochemical and Engineering Aspects, Vol. 342, pp. 1~7.
7. Lai, C.L. and Lin, S.H. (2003). “Electrocoagulation of chemical mechanical polishing (CMP) wastewater from semiconductor fabrication.” Journal of Chemical Engineering, Vol. 95, pp. 205~211.
8. Olsthoorn, X., Tyteca, D., Wehrmeyer, W., and Wagner, M. (2001). “Environmental indicators for business: a review of the literature and standardization methods.” Journal of Cleaner Production, Vol. 9, No. 5, pp. 453~463.
9. Romas, T.B., Alves, I., and Subtil, R. (2007). “Environmental performance policy indicators for the public sector: The case of the defence sector.” Journal of Environmental Management, Vol. 82, pp. 410~432.
10. The U.S. Environmental Protection Agency (USEPA) (2004). Guidance for normalizing environmental performance results.
11. Tong, L., Liu, X., Liu, X., Yuan, Z., and Zhang, Q. (2013). “Life cycle assessment of water reuse systems in an industrial park.”Journal of Environmental Management, Vol. 129, pp. 471~478.
12. Tsai, J.C., Kumar, M., and Chen, S.Y. (2007). “Nano-bubble flotation technology with coagulation process for the cost-effective treatment of chemical mechanical polishing wastewater.” Journal of Separation Purification Technology, Vol. 58, pp. 61~67.
13. Wu, M., Sun, D., and Tay, J.H. (2004). “Process-to-process recycling of high-purity water from semiconductor wafer backgrinding wastes.” Journal of Resources, Conservation & Recycling, Vol. 41, pp. 119~132.
14. Yang, G.C.C., and Yang, T.Y.(2004). “Reclamation of high quality water from treating CMP wastewater by a novel crossflow electrofiltration/electrodialysis process.” Journal of Membrane Science, Vol. 233, pp. 151~159.
15. You, S.H., Tseng, D.H., and Guo, G.L. (2001). “A case study on the wastewater reclamation and reuse in the semiconductor industry.” Journal of Resources, Conservation & Recycling, Vol. 32, pp. 73~81.
中文文獻
1. 力晶科技(民101),2012企業責任報告書。
2. 中華人民共和國建設部 (民 100),室外排水設計規範,中國計劃出版社,北京。
3. 內政部建築研究所(民 101),綠建築評估手冊,新北市。
4. 王炯柱(民 97),以離散事件模擬進行晶圓代工回收水系統流程之設計與分析,國立成功大學工學院工程管理碩士在職專班碩士論文。
5. 江世雄(民 100),半導體廠房水回收系統設計,國立成功大學工學院工程管理碩士在職專班碩士論文。
6. 林文雄、陳建宏、張珮琳等(民95),「高科技產業用水特性及節水技術之研究」,2006水利產業研討會論文集,第3卷,21-32頁。
7. 林村豐(民98),「冷卻水塔節水實務技術」,綠基會通訊專題。
8. 林昱宏(民 99),製程廢水回收處理系統之經濟效益研究,國立交通大學工學院產業安全與防災學程碩士論文。
9. 於幼華、張益誠(民 88),「永續發展指標」,環境教育季刊,第37卷,53-74頁。
10. 周俊杰、林孟杰、盧彭潭等(民101),「FAB Local Scrubber 機台用水軟水(SW)不足之改善與改造」,清潔生產暨環保技術研討會論文集,經濟部工業局。
11. 洪于婷(民88),都市發展永續性結構之研究,國立成功大學都市計畫研究所碩士論文。
12. 洪肇嘉、卓雅文(民90),「半導體產業環境與安全衛生績效指標之探討」,化工製程 本質安全設計與應用專刊,第48卷,第4期,72-80頁。
13. 財團法人工業技術研究院(民93),新竹工業區廢水回收再利用規劃計畫-民間參與之可行性評估暨先期計畫書,初版,經濟部水利署水利規劃試驗所,台中。
14. 黃志彬(民91),「高科技工業廢水處理操作效能提升研析」,第一屆高科技工業環保技術及安全衛生學術及實務研討會論文集,23-35 頁。
15. 陳仁仲、盧文俊、李士畦(民90),「工業用水效率與回收率的內涵探討」,工業污染防治,第77期,一月,122-159頁。
16. 陳彥旻(民 92),半導體業化學機械研磨廢水回收處理再利用技術研究,國立成功大學環境工程學系碩士論文。
17. 陳永坤(民 97),台灣環境永續發展評估指標之建立與應用研究,國立成功大學資源工程研究所經濟管理組博士論文。
18. 陳建男(民 99),綠色高科技廠房評估系統之研究,國立成功大學建築研究所碩士論文。
19. 許家榮(民97),高科技廠房水資源管理研究-提昇製程用水回收率影響因素探討,國立臺灣大學土木工程學研究所學位論文。
20. 張行道(民97),「營建工程績效評估」,中國土木水利工程學會會刊,第35卷,第1期,83-87頁。
21. 經濟部水利署(民85),冷卻水塔節約用水手冊。
22. 經濟部水資源局(民91),「廢污水回收再利用技術」,節約用水季刊,第27期,經濟部水利署台北辦公區出版。
23. 經濟部水利署(民99),工業廢水再生利用技術參考。
24. 蔡美戀(民92),鄉鎮層級都市永續發展指標系統架構之研究,國立中山大學公共事務管理研究所碩士論文。
25. 薛仁猷(民 100),半導體公司企業社會責任報告之環境績效指標-以台積電為例,國立成功大學土木工程研究所碩士論文。
26. 盧彭潭、陳奎麟、劉凱溢(民99),「高科技提昇製程用水回收率實務探討」,工業污染防治,第114期,七月,189-199頁。
網站
1. China Water Risk (2013) http://www.chinawaterrisk.org/resources/analysis-reviews/8-things-you-should-know-about-water-and-semiconductors/, accessed on 2013/12/06.
2. 水利法規查詢系統(2014) http://wralaw.wra.gov.tw/wralawgip/cp.jsp?lawId=8a8a852d1fa1a835011fa1dd69930031,
accessed on 2014/03/27.
3. 水利署節約用水績優單位及個人專輯(2012)-案例廠房三、四期
http://www.ftis.org.tw/water/2012sw/company08.html, accessed on 2012/12/06.
4. 中興工程顧問有限公司(2014),處理系統之設計規劃簡報。http://www.sinotech.com.tw, accessed on 2014/04/21.
5. 科學工業園區管理局(2013) http://www.csr.sipa.gov.tw/env04.html, accessed on 2013/12/30.
6. 南科建管法規(2014)
http://www.stsipa.gov.tw/web/WEB/Jsp/Page/cindex.jsp?frontTarget=DEFAULT&thisRootID=227, accessed on 2014/01/04.
7. 南科環保法規(2014)
http://www.stsipa.gov.tw/web/WEB/Jsp/Page/cindex.jsp?frontTarget=DEFAULT&thisRootID=226, accessed on 2014/01/04.
8. 莊子壽(民 99),台北市建築師公會簡報-台積電綠建築策略與實務簡報。
http://www.arch.org.tw, accessed on 2014/6/06.
9. 莊子壽(民100),科學工業園區廠務技術研討會簡報-綠廠房與永續園區。
http://www.asip.org.tw/userfiles/file/2011/Hsinchu/20111125.pdf,accessed on 2014/03/05.
10. 莊順興(民100),廢污水回收再利用技術,能環智庫叢書03-推動新生水水源開發成功案例分享評估,財團法人中技社網站。
http://www.ctci.org.tw/public/Attachment/11221537571.pdf, accessd on 2013/11/7.
11. 臺灣綜合研究院(2014),節水診斷輔導-節能減碳服務團隊。http://www.go-moea2.tw/example/n15.html, accessed on 2014/03/03.
12. 水利署(2013),各項用水統計資料庫,http://wuss.wra.gov.tw, accessed on 2013/12/10.
13. 水利署北區水資源局(2014),http://www.wranb.gov.tw/mp.asp?mp=5, accessed on 2014/08/05.
14. 水利署,家庭節約用水技術手冊,http://web.cgust.edu.tw/, accessed on 2014/08/05.
15. 江漢鍾(民99),節水教育訓練研習會-力晶P3廠節水經驗分享。
http://www.asip.org.tw/userfiles/file/2010/Hsinchu/9908231.pdf, accessed on 2014/05/06.
16. 環保署飲用水全球資訊網(2013)。http://dws.epa.gov.tw/drinkwater/index-13.html,
accessd on 2013/11/7.