本文針對液晶電視系統廠，保護面板機構，將理論與實務相互結合，做一系列整合性有條理的技術分析。
隨著歐盟環保法規RoHS與WEEE均對產業將面臨環保設計、環保製程、使用替代料、產品檢驗及成本降低的困難與挑戰，也因此環境受到破壞。針對目前企業技術能力，預先產品生命週期評估，透過設計方法－TRIZ、卡榫設計、產品裝配維修及回收分析〔易組裝（拆卸）設計、模組化及易回收設計、產品多樣化設計〕及綠色材料選擇，實際運用，分別綠色包裝設計，機構減量設計及綠色創新設計(圓形槽轉盤可拆式綠色創新腳座)，並提升產品4Rs-reduction(減量)，reuse(再利用)，recycle(循環利用)及recovery(回復功能)概念，達到具有環保特色的綠色產品。

To meet the environmental protection codes, such as RoHS and WEEE developed by industrialized counties, the producers of all the customer products have to endeavor their possible efforts to keep market competence as green products. This study focused on how the mechanism for protecting LCD-TV panel during its development stage is designed for environment friendly considerations.
To develop a new product, the earlier time of product lifecycle to take into account of environment protection considerations is design stage. The means can be employed including design for assembly, design for disassembly, modulization design, design for recycling, green material selection, and TRIZ method. For the mechanism to protect a LCD-TV panel, green packing (i.e. biodegradable materials used for packing), reduction of components by using snap-fit or less materials, design of the mechanism of sit-stand created by using TRIZ. Based on the concepts of 4Rs (i.e. reduction, reuse, recycling and recovery), the case studies described in this paper have shown that not only can the basic functions of products be reached, the level of green products can also be improved.

[Ahsh96] Ahshuller, G., And Suddenly the Inventor Appeared: TRIZ, The Theory of Inventive Problem Solving, Technical Innovation Center, MA, 1996.
[BASF] BASF Plastic, Snap-fit Design Manual,
http://www.basf.com/PLASTICSWEB/displayanyfile?id=0901a5e1800a6542
[Boot87] Boothroyd, G., Dewhurst, P., Product design for assembly, RI: Boothroyd Dewhurst, 1987.
[Brez01] Brezet, H., Form eco-design of products to sustainable system design: Delft’s experience, Proceedings of Eco-design 2001: Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, pp 605-612, 2001.
[Chen02] Chen, J.L, Green Evolution Rules and Ideality Laws for Innovative Design of products, Proceedings of Going Green-Care Innovation 2002, 4th international Symposium, Vienna, November 25-28, 2002.
[Clar97] Clarke, D. W., TRIZ: Through the Eyes of an American TRIZ Specialist, Ideation International Inc., Southfield, MI, 1997.
[Desi97] Desimone, L.U., and Popoff, F., Eco-efficiency: The Business Link to Sustainable Development, MIT Press, Cambridge MA, 1997.
[Eric99] Ericsson, A., and Erixon, G., Controlling Design Variants: Modular Product Platforms, ASME Press, USA, 1999.
[Genc97] Genc, S., Messler, R.W., Jr., Gabriele, G.A., Methodology for Locking Feature Selection in Integral Snap-Fit Assembly, Proceeding of the 1997 ASME Design Engineering Technical Conferences, Design Theory and Methodology Conference, Sacramento, CA, September 14-17, Paper Dac-4003, 1997.
[Grea96] Greadel, T.E., Weighted matrices as product life cycle assessment tools, The International Journal of Life Cycle Assessment, Vol.1, No.2, pp85-89, 1996.
[Hart93] Hartley P., Sustainable Engineering, Focus, Vol. 4, NO2, 1993.
[Hopf93] Hopfenbeck, W., Green management revolution: Lesson in environment excellence, Prentice Hall, 1993.
[Krol96] Kroll, E., Development of a disassembly evaluation tool, Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computer in Engineering Conference, Irvine: California, pp1-10, 1996.
[McGc91] McGraw, H., Product life analysis and product life extension, Tool for Increasing the Environmental Return on Investment, 1991.
[RoHS02] 2002/95/EC RoHS指令英文原文網址
http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_037/l_03720030213en00190023.pdf
[Tern98] Terninko, J., Zusman, A., and Zlotin, B., Systematic Innovation-An Introduction to TRIZ (Theory of inventive problem solving), CRC Press LLC, 1998.
[WEEE02] 2002/96/EC WEEE指令英文原文網址
http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_037/l_03720030213en00240038.pdf
[Wein98] Weinberg, L., Development of a streamlined, environment life-cycle analysis matrix for facilities, 1998 IEEE International Symposium on Electronics and the Environment, pp65-70, 1998.
[中06]　中華民國環保生物可分解材料協會，
http://www.ebpa.org.tw/page-2-3.htm，2006 。
[中96]　中華民國對外貿易發展協會編，綠色設計技術參考手冊 :資訊產品，中華民國對外貿易發展協會，1996。
[王91]　王仁慶，TRIZ創新設計方法之改良研究，國立成功大學機械工程學系，碩士論文，民國91年。
[平94]　葉文昌、劉松柏等，平面顯示器技術及未來趨勢2005技術篇，龍璟文化，民國94。
[台07]　台灣區電機電子工業同業公會，2007，http://www.teema.org.tw。
[吳06]　吳志歡，家電制造業的綠色設計及制造，廣東科龍電器股份有限公司，2006，http://cad.newmaker.com/disp_art/1310006/3880.html
[林06]　林明輝，平面電視產業展望，台灣工業銀行，2006年6月。
[張04]　張祥唐，整合TRIZ與可拓方法之綠色創新設計研究，國立成功大學機械工程學系，博士論文，2004 。
[財06]　財訊出版社，液晶電視大商機 ，財訊出版社，2006年11月。
[修71]　修廷璧，電視學原理及實習，大中國圖書公司，民國71年8月。
[陳90]　陳秋雲，e世代液晶顯示器，全華科技圖書股份有限公司，民國90年12月。
[陳95]　陳旺志，聰敏扣件之設計方法研究， 國立成功大學機械工程學系，碩士論文，民國95年。
[劉02]　劉志成，綠色創新設計方法之研究，國立成功大學機械工程學系，博士論文，2002。
[貿05]　貿易雜誌電子報　163期2005年01月01日。
http://www.ieatpe.org.tw/magazine/163-05.htm
[維06]　維基百科－電視，http://zh.wikipedia.org/wiki/电视，2006。
[曾96]　曾漢壽，瓦楞紙箱設計，台灣包裝工業雜誌社，1996。
[魏87]　魏漣邦，李清華，環境化設計－產品生命週期衝擊分析(三)，大業大學環境工程學系，行政院國家科學委員會專題研究計畫成果報告，民國87年。