簡易檢索 / 詳目顯示

研究生: 鄒晉堅
Tsou, Chin-Chien
論文名稱: 嘉南灌區田間輸水設施型式的比較研究
The Comparison Study on Field Water Conveyance Facilities of Chianan Irrigation Area
指導教授: 呂珍謀
leu, Jan-Mou
學位類別: 碩士
Master
系所名稱: 工學院 - 水利及海洋工程學系碩士在職專班
Department of Hydraulic & Ocean Engineering (on the job class)
論文出版年: 2008
畢業學年度: 96
語文別: 中文
論文頁數: 49
中文關鍵詞: 嘉南灌區灌溉方式灌溉效率管路明渠
外文關鍵詞: Chianan Irrigation Area, irrigation style, irrigation efficiency, open channels, piping
相關次數: 點閱:78下載:4
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 台灣早期農業的灌溉方式大部份較為粗放,在田間輸水渠道均為土渠(明渠),至民國60年代為改善損失量及提昇灌溉效益,才逐漸將土渠鋪設混凝土內面工。嗣隨著工商業發展和社會環境轉型快速,導致從事農業人口逐漸減少,又因應加入WTO後農業所受衝擊,為期能提昇灌溉效率及增加作物生產量,作此田間輸水設施型式(明渠或管路)的比較研究,並以嘉南農田水利會灌區為範例,嘉南灌區幅員遼闊,因此為利本文的研究,經灌區地形條件調查及訪詢該會從事於灌溉工程及管理工作之較具資深的人員結果,較適宜作為明渠與管路型式比較研究的灌區為屬白河水庫灌區,並以該灌區內已施設完竣的糞箕湖幹線第十四分線噴灌區作案例,而進行各項所需資料的蒐集及探討。
    依據所蒐集的各項相關資料進行水理、成本計算和可行性的評估,在水理方面為以重力輸水方式探討後為可行而不需加壓(動力),成本方面之設施建置為鋼筋混凝土U型溝(2,254元/m)>管路(965元/m)>梯型內面工(317元/m),並以灌溉作業、工程成本和維護管理等進行可行性的評估後,雖然輸水型式之施設以管路較具優勢,然嘉南灌區大部份係屬地形較緩的平原區,由於有效水頭的不足,以管路進行重力方式輸灌不適宜,因此仍以明渠輸灌較可行,而於明渠若以成本考量為以梯型內面工之設施較為經濟。
    經評估後田間輸水設施型式為以明渠較可行,但因社會環境轉型快速及加入WTO後農業所受的衝擊,未來農業可能趨於較精密灌溉,而另一輸水型式管路也可能成為未來的趨勢,因此為得農業的永續經營,建議採行集約農場的經營模式,另為管路以重力方式輸水需以克服水頭的不足,可利用幹支分線及堤防之用地設置調整池及抽水站。

    The irrigation style of Taiwan early ages was mostly casual and the field irrigation channels were earth ditches. Till 1970’s in order to improve irrigation efficiency and prevent water conveyance loses, earth ditches were gradually changed into cement lining ditches. And now the social environment changes rapidly resulted to agricultural population gradually decreased so this study focus on the improvement of irrigation efficiency and the increase of crop production. The comparison study of field water conveyance facilities is based on open channels and piping of Chianan Irrigation Association. But with the vast territory of Chianan Irrigation Association, after terrain conditions investigation and inquiry senior employees, the 14th sub-lateral irrigation area of Baiho reservoir was selected as a subject of research and data collecting in order to find most suitable field water conveyance facilities.
    Those related data are analyzed and evaluated with hydraulic calculations, cost calculations and feasibility. Moreover, piping is relatively better choice of water conveyance facilities after evaluations of irrigation operation, engineering cost and maintains management. But since Chianan irrigation area mostly belongs to placid plain, it is difficult to process piping irrigation. Therefore, open channels irrigation is more feasible and trapezoidal lining ditches engineering is the most economic way.
    Although open channels irrigation is more feasible, the future agriculture might need more precious irrigation ways for the social environment change and WTO’s impacts. Piping irrigation may become the future tendency for the sustainable agriculture management. For piping irrigation, intensive farms are suggested and the setting of adjustment pools and pumping stations is needed.

    摘 要......................................i Abstract .................................... ii 誌 謝.....................................iii 目 錄..................................... iv 表 目 錄..................................... vi 圖 目 錄..................................... vii 第一章 緒論..................................1 1.1 前言........................... 1 1.2 研究動機........................2 1.3 研究方法........................3 1.4 本文組織........................3 第二章 灌區水路設置與運..................... 5 2.1 灌溉情形....................... 5 2.1.1 嘉南灌區......................5 2.1.2 管路輸灌......................7 2.2 渠道設置........................8 2.2.1 輸水渠道設置..................8 2.2.2 田區輸水渠道..................9 2.3 田間輸水方法................... 10 2.3.1 用水之輸水情形................10 2.3.2 田間輸灌情形..................11 2.3.3 噴灌輸灌情形........ .........11 第三章 灌區擬定與水理探討................... 13 3.1 灌區擬定........................13 3.1.1 灌區調查............ ..........13 3.1.2 白河水庫灌區..................15 3.2 水理計算理論................... 17 3.2.1 管路................ ..........17 3.2.2 明渠................ ..........19 3.3 白河水庫灌區水理計算............23 3.3.1 管路水理計算..................23 3.3.2 明渠水理計算........ ..........25 第四章 工程建置與成本........................28 4.1 工程建置....................... 28 4.1.1 工程用地......................28 4.1.2 輸水設施建置..................30 4.2 工程成本........................33 4.2.1管路成本..... ..................33 4.2.2明渠水路成本(混凝土內面工).....34 4.2.3明渠水路成本(鋼筋混凝土U型溝).35 第五章 可行性探討.......................... 37 5.1 灌溉作業...................... 37 5.2 工程成本比較................... 38 5.3 維護管理....................... 38 5.4 可行性評估.................... 39 第六章 結論與建議............................42 6.1 結論............................42 6.2 建議......................... 43 參考文獻..................................... 44

    參考文獻
    1.中國農業工程學會,中國農業工程手冊農業水利之部(灌溉、墾殖、管理),1990。
    2.中國土木水利工程學會,混凝土工程施工規範與解說(土木402-88),科技圖書股份有限公司,2000。
    3.方軍,水資源嚴重缺乏-以色列用水要有許可證,環球時報,2004。
    4.台灣省農田水利會聯合會,農田水利會技術人員訓練教材灌溉排水工程類合訂本,1996。
    5.台灣省水利處,白河水庫灌區管路化規劃可行性評估,1998。
    6.台灣省嘉南農田水利會,白河水庫(糞箕湖幹線)灌區管路化試驗工程計畫,2000。
    7.台灣省嘉南農田水利會,嘉南農田水利會常用各項法令規章彙編,1999。
    8.台灣省嘉南農田水利會,土地徵收條例及相關法規,2005。
    9.台灣省嘉南農田水利會,中小給水路設計步驟,1989。
    10.台灣省嘉南農田水利會,曾文-烏山頭水庫系統灌溉管理四年成果報告,2005。
    11.吳瑞山,嘉南農田水利會員工訓練教材-明渠設計(水理篇),1997。
    12.易任,渠道水利學(上冊)國立編譯館出版,東華書局印行,1979。
    13.財團法人中正農業科技社會公益基金會,台灣農業水資源之學術研究(第三號),
    2002。
    14.許勝雄,95年度農田水利會人員培育訓練講義(灌溉計劃),2006。
    15.農業工程研究中心刊行,管路灌溉技術實務,2001。
    16.黃貴豪、胡文章,台東縣鹿野大圳龍田噴灌地區及專訪農委會水利科旱作灌溉專家蔡明華科長,財團法人豐年社-豐年半月刊48卷11期,1998。
    17.經濟部水利處,推廣省水管路灌溉計劃-成果報告,2000。

    下載圖示 校內:立即公開
    校外:2008-01-28公開
    QR CODE