在電子構裝製程中，封膠材料在熟化成型過程中會與其他異質材料如模具表面、基板（Substrate）以及導線架（Leadframe）之間產生黏著的現象，稱為黏著效應（Adhesive Effects），而此黏著效應對於不同材料有不同的效果。對於模具而言，黏著效應會造成產品的黏模，而影響產品的品質。但對於基板或導線架而言，黏著的效應越大，所達到的可靠度就越高。但黏著力的形式分為的正向黏著力與剪向黏著力，因此希望能夠準確的得知此兩種力之大小，進而能夠找出可以找出一些方法來改善產品的品質。
本研究針對此黏著效應，自行研發一套自動化電子封裝黏著力測試儀器與量測技術，用來量測金屬材料表面與封膠材料之間接觸的正向與剪向黏著力，希望藉由發展此套的黏著力量測設備，能更確實掌握黏著力產生的力量。

In IC packaging, when epoxy molding compound（EMC）is filling the mold cavity and cured in the mold, adhesive effects occurs in the interface between mold surface, substrate, leadframe and EMC. Adhesive effects are good for leadframe and substrate, because the larger adhesion cause the better reliability. But adhesion between mold and EMC will affect the products quality. Normal and shear adhesion force exist in the IC packaging. So we want to understand the exact value and avoid the problems.
So this project will cooperate with Shen-Xiang automatic industry company to develop an automatic normal and shear strength measurement technology to understand the normal and shear adhesion force measurement process.

[1] Loos, A. C., and G. S. Springer, “Curing of the Epoxy Matrix Composites,” J. Comp. Mat., 135, (1983).

[2] Springer, G. S., “Resin Flow During the Curing of Fiber Reinforced Composites,” J. Comp. Mat., 16, 400(1982).

[3] Gonzalez, U. F., S. F. Shen, and C. Cohen, “Rheological Characterization of Fast-Reacting Thermosets Through Spiral Flow Experiments,” Polym. Eng. Sci., 32, 172-181(1992).

[4] Frutiger, R. L., “The Effect of Flow on Cavity Surface Temperatures in Thermoset and Thermoplastic Injection Molding,” Ploym. Eng. Sci., 26, 243-254(1986).

[5] Lee, C. C., and C. L. Tucker III, “Flow and Heat Transfer in Compression Mold Filling,” J. Non-Newtonian Fluid Mech., 245-264(1987).

[6] “Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading,” STD. ASTM D1002-94.

[7] “Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds,” STD. ASTM D1062-96.

[8] “Standard Test Method for Tensile Properties of Adhesive Bonds,” STD. ASTM D897-95a.

[9] B. A. Chapman, H. D. DeFord, G. P. Wirtz and S. D. Brown, in: Technology of Glass, Ceramic, or Glass-Ceramic to Metal Sealing, W. E. Moddeman, C. W. Merten and D. P. Kramer(Eds), MD-Vol. 4,pp. 77-87. American Society of Mechanical Engineers, New York(Copyright 1987).

[10] “Test Method for Measurement of Adhesive Strength Between Leadframes and Molding Compounds,” STD. SEMI G69-0996.

[11] Xiang Dai, Mark V. Brillhart, and Pauil S. Ho, “Polymer Interfacial Adhesion in Microelectronic Assemblies,” Manuscript for the 48th Electronic Components and Technology Conference, Seattle, Washington (1998).

[12] 張祥傑, “微材料測試系統之設計與製作,” 國立成功大學機械工程研究所碩士論文(1999).

[13] 王俊祥, ”電子封裝黏模效應之量測技術開發與研究,” 國立成功大學機械工程研究所碩士論文(2000).

[14] 莊俊華, ”IC構裝黏模測試機之設計與製造,” 國立成功大學工程科學研究所碩士論文(2001).

[15] 朱言主, ” IC封裝模具黏著效應之研究,” 國立成功大學工程科學研究所碩士論文(2002).

[16] R. J. Good, “Treatise on Adhesion and Adhesives,” Vol. 1, R. L. Partick, ed., MARCEL DEKKER INC(1967).

[17] 韓錦鈴, “環氧樹脂及聚胺脂交聯環氧樹脂之研究,” 國立台灣大學材料科學研究所博士論文(1993).

[18] Matsumoto, A. and M. Oiwa,”Studies of Polymerization of Diallyl Compounds. VII. Kinetics of the Polymerization of Diallyl Esters of Aliphatic Dicarboxylic Acids,” J. Appl. Polym. Sci., 17, 2415(1973).

[19] Son, P. N. and C. D. Weber, “Selectivity and Kinetics of Epoxy Resin-Bisphenol A Reaction Catalyzed by Certain Guanidine Derivatives,” J. Appl. Sci., 17, 2415(1973).

[20] Babaylvsky, P. G. “Epoxy Thermosetting Systems: Dynamic Mechanical Analysis of the Reactions of Aromatic Diamines with the Diglycidyl Ether of Bisphenol A,” J. Appl. Polym. Sci., 17, 2067(1973).

[21] Lee, W. A. “Study of Cure of Epoxy Resins by Torsional Braid Analysis,” Brit. Polym. J., 15, 40(1983).

[22] Horie, K. “Calorimetric Investigation of Polymerization Reactions III. Curing Reaction of Epoxides with Amines,” J. Polym. Sci., A-1,8, 1357(1970).

[23] Willard, P. E. “Determination of Cure of Diallyl Phthalate Using Differential Scanning Calorimetry,” Polym. Eng. Sci., 12, 120(1972).

[24] Kamal, M. R. “Kinetics and Thermal Characterization of Thermoset Cure,” Polym. Eng. Sci., 13, 59(1973).

[25] Prime, R. B. “Differential Scanning Calorimetry of the Epoxy Cure Reaction,” Polym. Eng. Sci., 13, 365(1973).

[26] Dusek, K. and M. Bleha, “Curing of Epoxide Resins: Model Reaction of Curing with Amine,” J. Polym. Sci., Polym. Chem. Ed., 15, 2393(1979).

[27] Moroni, A., J. Mijovic, E. M. Pearce, and C. C. Foun, “Cure Kinetics of Epoxy Resins and Aromatic Diamines,” J. Appl. Polym. Sci., 32, 3761(1986).

[28] Pusatcioglu, S. Y., A. L. Fricke and J. C. Hassler, “Hests of Reaction and Kinetics of a Thermoset Polymer,” J. Appl. Polym. Sci., 24, 937(1979).

[29] B. A. Chapman, H. D. DeFord, G. P. Wirtz and S. D. Brown, in: Technology of Glass, Ceramic, or Glass-Ceramic to Metal Sealing, W. E. Moddeman, C. W. Merten and D. P. Kramer(Eds), MD-Vol. 4,pp. 77-87. American Society of Mechanical Engineers, New York(Copyright 1987).

[30] J. D. Achenbach ”Fracture mechanics : fundamentals and applications” (1994)

[31] S. D. Brown, Room-Temperature Adhesive Strength Tests of Various Flame-Sprayed and Flame-Plated Ceramic Coatings. Progress Report No. 20-374. Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA (1959).

[32] ASTM Standard C633-79, Standard Test Method for Adhesion of Cohesion Strength of Flame-Sprayed Coatings. 1992 Annual Book of the ASTM Standards, Vol.02.05, pp. 663-667(1992)

[33] 李輝煌編著, ”田口方法─品質設計的原理與實務,” 國立成功大學工程科學系(2000)

[34] 陳朝光,王明庸,黃泰翔, ”機械設計製圖,” 高立圖書有限公司(1987)