| 研究生: |
黃國倉 Huang, Kuo-Tsang |
|---|---|
| 論文名稱: |
辦公建築生命週期節能與二氧化碳減量評估之研究 Research on Life Cycle Energy Conservation and Carbon Dioxide Emission Assessment of Office Buildings |
| 指導教授: |
林憲德
Lin, Hsien-Te |
| 學位類別: |
博士 Doctor |
| 系所名稱: |
規劃與設計學院 - 建築學系 Department of Architecture |
| 論文出版年: | 2006 |
| 畢業學年度: | 94 |
| 語文別: | 中文 |
| 論文頁數: | 104 |
| 中文關鍵詞: | 建築日常節能 、二氧化碳排放 、生命週期評估 、辦公建築 |
| 外文關鍵詞: | Life Cycle Assessment, Carbon Dioxide Emission, Office Buildings, Building Daily Energy Conservation |
| 相關次數: | 點閱:129 下載:18 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
由於人類的過度建設開發導致地球環境嚴重惡化,溫室效應的結果導致全球氣候變遷。自京都議定書以來佔溫室氣體比重最大的二氧化碳排放減量一直是全球關注之焦點。為呼應地球環保之課題就營建之角度而言,本研究針對辦公建築生命週期之各個階段進行完整之二氧化碳排放量評估,並以日常節能之觀點提出二氧化碳減量之對策。此外,本文建構了辦公建築生命週期CO2之評估系統,使得建築從業人員得以在建築設計階段即可估算建築物對地球環境之衝擊程度,進而將評估結果反饋至建築設計上,以提供設計者進行綠建築與低環境衝擊設計之重要參考依據。本研究獲致之成果摘要如下:
1.統合既有文獻完成辦公建築完整生命週期二氧化碳評估之體系。
2.日常能源使用部分,以理論之數學方法推估各種建築設備系統之全年耗能量以換算全年二氧化碳排放量。
3.空調系統部分以動態熱負荷計算軟體DOE-2配合最大熱負荷計算氣象資料與平均氣象年(TMY2),完成由最大空調主機容量推估至全年空調系統耗能量之完整過程,使得複雜之空調耗能量得以進行解析。
4.整合建築設備知識與現行綠建築評估之方法,以理論推估辦公建築照明系統、給水系統、電梯、通風換氣系統、辦公事務設備用電等各面向之全年耗電量。
5.經模擬辦公建築生命週期之二氧化碳排放量後,日常能源使用階段所佔CO2之排放比例達80%以上,是所有各階段中比例最大者。因此,進行建築日常節約能源是整個建築部門最為重要且最有效的二氧化碳減量對策。
6.本文同時完成辦公建築生命週期二氧化碳評估系統之建置,並以對比評估之方式來檢視辦公建築之二氧化碳減量對策。而得以針對各種不同建築外殼設計與空調系統設計等辦公建築,進行全方位之生命週期評估。
7.由生命週期評估系統進一步模擬各種建築外殼因子、空調系統因子、照明系統因子等,對CO2排放減量之敏感度分析,並提出相對之CO2減量對策。
The Earth environment has severely deteriorated as a result of excess construction and development. The “Green House Effect” has made global climate change. Since from the Kyoto Protocol, the reduction of carbon dioxide emission is always under the spotlight from all over the world. To respond the global environmental issue, from the point of view of building construction session, this research completes the assessment system of CO2 emission of various phases from the entire life cycle of office buildings. Furthermore, this paper has proposed the CO2 emission reduction strategies from daily energy use perspective. In addition, the system of office building’s life cycle assessment of CO2 emission has been established. It facilitates architecture designers to evaluate building environmental impact from the beginning of the design process. From the evaluation outcome of the LCA-CO2 system, it directly feeds back to and gives information for decision making of the designers to remodel building design and to help achieving a low environmental impact building. The achievements are concluded as follows:
1.Completes the office buildings’ life cycle assessment system of CO2 emission by integrating several former researches into the new study of this paper.
2.Introduce numerical methods to estimate the annual energy use of various building equipment systems to evaluate the amount of CO2 emission of each part.
3.Sets of prediction models of annual HVAC system energy use are established by means of dynamic cooling load calculation program (DOE-2). The whole prediction process begins from estimating of maximum chiller size to annual HVAC energy use. It makes the annual HVAC energy use to be capable of being predicted.
4.The annual energy use numerical predicting models of building lighting system, plumbing system, elevators, ventilation system and the office equipment plug loads are developed by integrating building services system knowledge as well as nowadays Green Building Evaluation System.
5.The amount of CO2 emission from the daily energy use, which is the largest, comprises more than 80% out of the total CO2 emission during the whole building life cycle. Therefore, the most important and effective strategies of reducing CO2 emission should be focused on the building daily energy use section.
6.Evaluating system of office building life cycle assessment of CO2 emission is developed along with the paper to enable evaluations of all full aspects from building envelope design to air-conditioning system.
7.The CO2 emission reduction strategies are proposed through several sensitivity analyses of building envelope design, lighting system and HVAC system factors.
C01 洪貞信,1985,<最新電工規則與實務>,前程出版社。
C02 陳敬良,1993,<辦公建築設備水準等級之評估探討>,成功大學碩士論文。
C03 日本建築學會,2002,<建築設計資料集成>,雷尼國際出版有限公司。
C04 中井多喜雄, 木村芳子,1997,<圖解建築供電技術暨電梯設備>,千華圖書。
C05 鄭信義,1982,<給排水衛生配管設計與施工>,永大書局。
C06 山田信亮,2003,<建築設備實用公式>,五南出版。
C07 鄭政利,1998,<建築給排水設備節能之研究>,內政部建築研究所。
C08 中華民國建築學會,1987,<給排水衛生設備技術規範>,內政部營建署。
C09 陳清茂,2003,<辦公建築室內空間耗電量之研究-以台北市出租型辦公大樓為例>,文化大學碩士論文。
C10 林憲德 等,2003,<綠建築解說與評估手冊-2003年版>,內政部建築研究所。
C11 林憲德,2003,<熱濕氣候的綠色建築>,詹氏書局。
C12 林憲德,1989,<建築空調耗能評估之研究>,文山書局。
C13 郭柏巖,2005,<住宅耗電實測解析與評估系統之研究>,成功大學博士論文。
C14 黃瑞隆,1995,<空調系統耗能量計算及節能效益分析>,中山大學博士論文。
C15 張又升,1997,<RC建築物生命週期環境負荷評估-以耗能量與溫室氣體排放量解析>,成功大學碩士論文。
C16 張又升,2002,<建築物生命週期二氧化碳減量評估>,成功大學博士論文。
C17 歐文生,2000,<建築物室內裝修環境負荷評估之研究>,成功大學碩士論文。
C18 黃榮堯,1997,<建築構造方式對環境負荷與影響之研究>,內政部建築研究所。
C19 楊煦照,1996,<建築物之耗能與環境衝擊解析>,成功大學碩士論文。
C20 內政部營建署,1986,<換氣與空氣調節設備技術規範>,中華民國建築學會。
C21 周鼎金,1998.10,<辦公建築照明設計耗電簡易評估與應用之研究>,中國工商學報第20期。
C22 周鼎金,1997,<建築設備>,茂榮書局。
C23 周鼎金,1997,<建築物照明設計耗電評估模式之研究>,建築學報第22期。
C24 日本建築學會編,1993,<建築設計資料集成6>,臺隆書店。
C25 經濟部能源局,2005,<2004年能源統計手冊>。
J01 中村守保 等,1982,<建築電設備一問一答>,明現社刊。
J02 木村武雄, 木村利雄,1977,<――>,―社。
J03 空調和衛生工,2000,<HASS 206-2000給排水衛生設備規準同解說>。
J04 日本建築設備士協會,<建築設備設計II給排水衛生編>,技術書院。
J05 空調調和衛生工,1976,<空調和衛生工便>。
J06 吉村(Yoshimura, etc.),1978.9,<日積算全天日射量每時全天日射量推定>,日本建築學會學術演講梗概集。
J07 谷口孚幸、伊藤武美,2005,<地球環境都市>,理工圖書。
J08 岡 建雄,2006,<―設計>,―社。
J09 岡 建雄,2000.6,<LCCO2試算方法>,建築技術。
J10 空調調和衛生工,1995,<地球環境時代建築設備課題>。
J11 石福昭、伊香賀俊治,1993,<CO2建物評價>,建築設備士1993.3 地球環境特集。
J12 中原信生,1983,<建築設備省―>財團法人省――。
J13 建築設備大系編輯委員會編,1975,<建築設備大系6—建築設備設計III>。
J14 渡 要 等,1967,<建築設備>,朝倉書店。
J15 井上宇市,1982,<空調和>,丸善株式社。
J16 日本建築設備士協,1984,<建築設備設計-給排水衛生編>,技術書院。
J17 日本建築設備士協,1980,<建築設備省―設計手法>。
J18 空調調和衛生工,2000,<建築設備省―技術指針>。
J19 井村秀文,2001,<建設LCA>,―社。
J20 松尾陽 等,1980,<空調設備動的熱負荷計算入門>,日本建築設備士協。
J21 谷口孚幸、伊藤武美,1997,<地球環境都市>,理工書。
J22 田口玄一、小西省三,,<直交表方>,日科技連。
J23 新雅夫,1974,<空調設備一問一答>,明現社刊。
J24 住宅建築省―機構,1980,<事務所建築省―基準計算手引>。
J25 住宅建築省―機構,1993,<建築物省―基準計算手引>。
E01 ASHRAE, 2005,“ASHRAE Handbook Fundamentals-2005”
E02 ASHRAE, 2004, “ASHRAE Standard 90.1- Energy Standard for Buildings Except Low-Rise Residential Buildings”.
E03 Abushakra, B., J.S. Haberl, and D.E. Claridge. 2004, “Overview of literature on diversity factors and schedules for energy and cooling load calculations (1093-RP)”, ASHRAE Transactions 110(1):p.164-176.
E04 ASHRAE, 2002, “90.1 User’s Manual- ANSI/ASHRAE/IESNA Standard 90.1-2001”.
E05 Diamond S.C. et.al.,1985,”Monte Carlo Technique for Weather Simulation”,Department of Architectural Engineering, The Pennsylvania State University.
E06 David E. Knebel, 1983, “Simplified Energy Analysis Using the Modified Bin Method”, ASHRAE.
E07 Faye C. McQuiston, et al., 2000,”Heating, Ventilating, and Air Conditioning-Analysis and Design-5th Edition”, John Wiley & Sons.
E08 Joe Huang, et al., 1991, “481 Prototyipical Commercial Buildings for 20 Urban Market Areas”, Gas Research Institute, Report No. GRI-90/2036.
E09 The Trane Co., 1955, “Trane Air Conditioning Manual”
E10 Stein, Reynolds, McGuinness, 1986, ”Mechanical and Electrical Equipments dor Buildings-7th Edition”, John Wiley & Sons.