簡易檢索 / 詳目顯示

研究生: 鄭巧欣
Cheng, Chia-Hsin
論文名稱: 建築物軀體工程碳排構成分析-以南部地區住宅、學校、辦公建築為例
A Morphological Analysis of Carbon Dioxide Emissions of Construction: Case study of residential, school, office building in Southern region of Taiwan.
指導教授: 林憲德
Lin, Hsien-Te
學位類別: 碩士
Master
系所名稱: 規劃與設計學院 - 建築學系
Department of Architecture
論文出版年: 2013
畢業學年度: 101
語文別: 中文
論文頁數: 75
中文關鍵詞: 建築生命週期(LCA)CO2排放量建材CO2排放量資料庫節碳效益
外文關鍵詞: Life Cycle of Architecture (LCA), Co2 emission, database of Co2 emission of construction materials, efficiency of carbon reduction
相關次數: 點閱:153下載:26
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 因應地球暖化危機,二氧化碳議題也備受矚目,低碳經濟議題漸漸浮上檯面,其中CO2占溫室效應氣體中五成左右,為主要影響因子。因此關鍵於建築領域中如何有效把關。本研究針對生命週期建築建設階段的假設工程、軀體工程、室內裝修工程進行探討,其中CO2 排放量計算公式LCCO2 structure由 張又升( 2002 )調查資料累積評估而成,但未使用工程估價表進行計算,且案例距今多年,恐有異變之虞。
    與過去相比,無論是天災或人為因素,人們除了注意建築物的美觀也更重視加強建築整體的安全性,所以內政部於民國94年修訂「建築物耐震設計規範及解說」,新規範必然影響建築物所需之用量,間接影響建築碳排放量,由於文獻年代較早,因此有必要取得近期的估價表進行計算以求準確度。
    以此為基礎,本研究進行住宅、學校、辦公案例蒐集,將工程估價表中的項次轉換成生命週期分類,再依模板、鷹架、混凝土、鋼筋、門窗、內裝、外裝工程項目之單位碳排整理,從多項案例找出具有影響力的因子,利用STATA統計軟體進行迴歸分析,以個別考量影響之因子再總整理出方程式,可縮短案例概估時間進行評估,在建築二氧化碳減量方面對症下藥。
    若能針對建築規劃時進行合理的設計,透過建築材料合適使用量計算,評估建築物在二氧化碳排放量是否超量,提供未來建築相關行業及主辦機關快速審核與評析建築物新建時之碳排量,避免過度資源損耗,有助於建築二氧化碳減量與資源有效利用,使建築物達到輕量化、最適化之目標,以落實國家推動綠建築及低碳建築之政策。

    Facing the crisis of global warming, topics concerning carbon dioxide have drawn much attention, particularly the topic of low-carbon economy. The primary impact factor of global warming is CO2, accounting for about 50% of the total greenhouse effect gases. The key to solve such problem is how to effectively control CO2 in construction field. This study conducts discussion on the false-work, the structure-work and the interior decoration-work during the construction phase of a life cycle. And the CO2 emission formula LCCO2 structure is derived from the accumulated assessment of survey data by Chang You-Sheng’s (2002) without using a project evaluation sheet to make calculations, which may have changed since the case has been completed for years.
    Compared with either natural disasters or human factors in the past, people value the overall safety of the architecture in addition to its beautiful appearance. Consequently, the Ministry of the Interior amended the Seismic Design Specifications and Commentary of Buildings in 2005, which necessarily influence the consumption required by architectures and indirectly influences the carbon emissions. Considering the literature is relatively old, it is quite necessary to obtain the near-term evaluation sheet to compute for accuracy.
    Based on this, the study collects relative evaluation sheets of residence, schools and offices, converts categories in project evaluation sheet into life cycle classification, and then lists the carbon emission of individual items like mould plate, scaffold, concrete, reinforced bar, doors and windows, interior and exterior decoration projects, so as to find the most influential factor. Subsequently, through the regression analysis with STATA software, it concludes the formula based on factors considered individually, which can shorten the case evaluation time and then design corresponding countermeasures in reducing carbon dioxide emission.
    If a reasonable design aiming at construction planning can be taken to evaluate whether the architecture exceeds standard of carbon dioxide emissions through the calculation of appropriate usage amount of building materials, it may provide architecture-related industries in the future and carbon emissions of new buildings which the sponsoring agency quickly inspect and evaluate. As a result, it may avoid excessive resource waste, facilitate the abatement of carbon emission and effective use of resources, and reach the objective of light-weight and optimization of buildings, which finally executes the national policies of promoting green and low-carbon architecture.

    目錄 4 第一章 緒論 9 1-1 前言 9 1-2 研究動機與目的 11 1-3 研究方法與流程 14 1-4 研究範圍 17 第二章 文獻回顧 18 2-1 相關文獻彙整 18 2-2 生命週期評估(LIFE CYCLE ASSESSMENT,簡稱LCA) 20 2-3 環境負荷減量(ENVIRONMENTAL LOAD) 22 2-4 環境負荷統計方法 22 第三章 構成分析流程與樣本資料說明 24 3-1 構成分析分類說明 24 3-1.1 IFRS國際財務報告標準 26 3-1.2 分類說明 27 3-2 案例計算流程說明 29 3-3 案例限制條件 31 第四章 案例型態整理 32 4-1 構成分析分類說明 32 4-2 加工材資料庫 35 4-3 迴歸統計軟體運用 38 第五章 建築二氧化碳案例分析及評估成果 39 5-1 住宅建築二氧化碳之案例分析 40 5-2 學校建築二氧化碳之案例分析 46 5-3 辦公建築二氧化碳之案例分析 52 5-4 建築二氧化碳相關因子之評估分析 58 5-4.1 模板分析 58 5-4.2 鷹架分析 59 5-4.3 混凝土、鋼筋分析 60 5-4.4 門窗分析 61 5-5 住宅、學校、辦公STATA線性迴歸分析 64 5-5.1 住宅線性迴歸分析 66 5-5.2 學校線性迴歸分析 67 5-5.3 辦公線性迴歸分析 68 5-5.4 住宅、學校、辦公建築迴歸算式驗證 69 第六章 結論與建議 70 6-1 結論 70 6-2 建議 72 參考文獻 73

    1.IPCC,「Policy marks Sammary of the Scientific Assessment of ClimateChange」,,2007
    2.張又升,建築物生命週期二氧化碳減量評估,2002
    3.建築產業生命週期CO2減量評估之應用研究, 內政部建築研究所期末報告,2008
    4.鄭政利等,「建築構造專題討論報告 -模板工程- 」,成大學建研所,1985
    5.建築規畫之柱尺寸概估程式-以鋼筋混凝土構造為例,成大學建研所,2008
    6.謝明哲,「活斷層附近鋼筋混凝土校舍建築耐震設計研究」,成大學建研所,1998
    7.賴晟偉,「住宅大樓生命週期二氧化碳排放量研究-鋼筋混凝土構造之個案比較」,臺北科大建築與都市設計研究所 ,2010
    8.「建物の数ハンドブツク」,2012
    9.邱佳淳,「新建建築工程大宗材料用量分析之研究」, 2012
    10.劉漢卿,「建築生命週期能源消費與溫室氣體排放量分析」,成大碩論,1994
    11.「Revised 1996 IPCC Guidelines for Greenhouse Gas Inventories」,IPCC/OECD,1996
    12.張又升,「RC 建築物生命週期環境負荷評估---以耗能量與溫室氣體排放量解析」,成大碩論,1997
    13.內政部建築研究所編譯叢書,1998,「建築生命週期能源計算程式操作手冊」,內政部建築研究所。
    14.林憲德,「綠建築設計技術彙編」,內政部建築研究所,2000
    15.歐文生,「建築物室內裝修環境負荷之研究--以耗能量與二氧化碳排放量解析」,成大碩論,2000
    16.林憲德、張又升、歐文生,「台灣建築生命週期CO2 排放量評估」,2001年永續建築國際研討會,台南,2001
    17.張又升,「建築物生命週期二氧化碳減量評估」,成大博論,2002
    18.林建隆,「住宅設備生命週期二氧化碳排放量評估」,成大碩論,2003
    19.林憲德,「綠建築解說與評估手冊」,內政部建築研究所,2003
    20.林憲德,「熱濕氣候的綠色建築」,詹氏出版社,2003
    21.王坦 ,「建築工程結構材料用量之統計與分析-以新竹地區 R.C 住宅為例」,中華大學土木與工程資訊學系碩士論文,2003 年
    22.陳長庚,「台灣地區 921 地震後建築結構體工程造價解析與省思」,第六屆台灣建築論壇-921 震災 10 週年回顧及展望,2009 年。
    23.許振武,「台灣地區中高層集合住宅造價分析」,成功大學建築研究所碩士 論文,1993 年。
    24.謝明恕,「高雄地區集合住宅工程數量推估模式之研究」,成功大學建築研究所碩士論文,1996 年。
    25.黃玲玲,「以透天住宅案例推估工程數量及參數之研究」,逢甲大學土木工程學系研究所碩士論文,2006 年。
    26.吳昭慧,「資訊化在營建工程應用-EXCEL 操作」,新文京開發出版股份有限公司,2001 年。
    27.劉慶禧,「建築工程估價」,科技圖書股份有限公司,1996。
    28.臺北市政府工務局,「工料分析手冊」,2011 年。
    29.許書宗,「RC 建築結構體估算實例」,詹氏書局,1998 年。

    下載圖示 校內:立即公開
    校外:立即公開
    QR CODE