簡易檢索 / 詳目顯示

研究生: 林宛萱
Lin, Wang-Hsuan
論文名稱: 中古貨櫃應用於中繼屋之研究-以構法計畫觀點探討之
Application Research of Second-Hand Shipping-Container in Disaster Relief Interim Housing from the Perspective of Planning of Building Construction Design
指導教授: 陳震宇
Chen, Chen-Yu
學位類別: 碩士
Master
系所名稱: 規劃與設計學院 - 建築學系
Department of Architecture
論文出版年: 2013
畢業學年度: 102
語文別: 中文
論文頁數: 154
中文關鍵詞: 構法計畫貨櫃中繼屋災後臨時建築
外文關鍵詞: planning of building construction design, shipping-container, disaster relief interim housing
相關次數: 點閱:170下載:9
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 近年全球重大災害頻繁,使人重視災民安置之議題。本研究觀察到貨櫃應用於災後中長期收容場所-中繼屋之潛力;貨櫃屋施工簡易、快速、可轉用、擴建容易,足以滿足災後中繼屋安置之需求。
    然而貨櫃原非建材,因此在轉用為建築物時,必然衍伸構造相關課題,故本研究以構法計畫角度出發,探討貨櫃從海上之運輸工具,轉化為中繼屋的時,如何處裡相關之構造設計,以確保中繼屋之居住性能與生產效率。
    本研究透過構法計畫理論(內田詳哉、大野隆司,1985),將影響構造之因素分為機能面與生產面,建立貨櫃中繼屋之構造系統與初步貨櫃中繼屋之構造計畫,接著從文獻回顧、貨櫃建築之相關調查、中繼屋之相關調查所得之資料,從中檢驗貨櫃中繼屋構法計畫之合理性,並發掘構造相關問題。經過綜合分析後,歸納並整理貨櫃運用於中繼屋於機能面與生產面相關課題,由構法計畫理論下之不同方法探討貨櫃運用於中繼屋之構造相關課題,使未來貨櫃中繼屋的發展得到助益。

    以下為本研究之成果:
    1.建立貨櫃中繼屋構造系統,分別為基礎、軀體、開口、設備、內裝、外部構造等部位。
    2.建立貨櫃中繼屋構法計畫,有系統研究構造相關課題,並從機能面及生產面提出以下建議:

    A.機能面相關課題
    a. 結構安全性:於基礎使用能夠抵抗拉力之接頭如鎖固類、焊接類;軀體盡量使櫃角與櫃角接合;於外部構造增加與軀體固定之面積,並增設風拉桿。
    b. 隔熱性能:抬高軀體;內裝採用隔熱效果較佳之材料施作如矽酸鈣板內填隔熱棉;外部附加具有遮陽效果之構造如雙層屋頂;設備加設可降溫之設備如風扇、冷氣。
    c. 隔音性能:內裝採用隔音效果較佳之材料矽酸鈣板內填隔音棉;雙層屋頂之面材使用較厚實之材料如三明治板;空間配置上同一垂直空間給同一戶使用,減少不同戶間噪音之傳遞。
    d. 換氣性能:在整體之配置上,減少一戶之深度,增加中繼屋間之棟距,抬高中繼屋與基地;於室內安裝有助通風之設備如風扇、冷氣。
    e. 採光性能:增加開口部之面積,,使用外遮陽;於室內與室外安裝照明設備。
    f. 防水性能:軀體應確實修補再使用;接縫處應確實填膠;抬高中繼屋與基地之距離。
    g. 防火性能:內裝使用具有防火功能之材料如矽酸鈣板、並配合適當的構法如輕鋼構隔間、明架天花板。

    B.生產面相關課題
    a. 使用當地人力資源
    (1) 生產過程:使用現場生產模式來施作。
    (2) 施工之分配:依照工法之技術性與專業性分配合適工項。
    b. 施工安全性:透過工項之分配可以確保。
    c. 施工簡易性:
    (1) 生產流程:使用先將軀體內部完成再至現場組裝之半預製式生產流程,減少構造之介面。
    (2) 各部位構造之材料、構造:減少材料之種類、選用工法較簡單之構法如鎖固類之基礎接頭。
    d. 時間經濟性
    (1) 興建程序:可於災難發生之前預先興建並儲存。待需要時可即刻送至需要之地區。
    (2) 生產過程:採用預製化之生產過程。
    (3) 構法之選擇:於各部位可以採用組裝快速之構造如使用單元式浴廁。
    e. 再利用性
    (1) 構法之選擇:各部位構造應不同貨櫃分開施作、減少轉用時破壞之比例、選擇可重複使用之單元構件。

    With the growing number of serious disasters around the world , people pay more attention on issue of housing disaster victims. The study observed the fact that we apply shipping-container to disaster relief interim housing. An interim housing made of containers can be built easily and fast ,and it is easy to recycle or expand . It meets the need for building an interim house in a short time.
    However, the shipping-container is not designed originally for architecture .It must occur problem concerned with build construction while we convert the container into an architecture. As a result ,the research was aimed at developing a method of shipping-containers-into-interim-housing transformation from the perspective of planning of building construction design so as to systematically design interim housing and guarantee the quality both in construction and habitation .
    Based on the theory of planning of building construction design (by Yoshichika and Ono,1985), the study assumed the factor that concerned with building construction can be divided into two dimension of habitation and manufacture,and also established shipping containers interim housing construction system and initial construction planning . In order to examine the construction planning and discuses the construction problem concerned, an analysis on construction planning started according to the materials from reference and case studies .After the comprehensive analysis , the study summarized the adaptation for shipping container interim-housing to take in both dimension of habitation and manufacture ,which the study expected to make a contribution to shipping container’s development in interim housing .
    The main theoretical contribution are two:
    1. Establishment of shipping containers interim housing construction system:It can be divided into 6 part –foundation ,body ,opening ,facility, interior and exterior.
    2. Establishment of container interim-housing construction planning and summarize the adaptation for shipping container interim-housing to take in both dimension of habitation and manufacture:

    A. habitation dimension:
    a.Structural Safety:On the connecting joint of foundation, apply tension resistant member such as twistlocks or welding filling. As for the body ,connecting each other with corner-to-corner position is suggested. At the exterior ,strengthen the connection to the body and apply tension bar on it.
    b.Heat-insulating property:Lift up the building .In the interior, apply material of better heat-insulating property like calcium silicate board as surface material and glass wool as filling . Apply a shelter such as double roof at the exterior. Use a fan or an air-conditioner.
    c.Sound insulation property:In the interior, apply material of better heat-insulating property like calcium silicate board as surface material and glass wool as filling .Apply thicker material like sandwich panel on the double roof. Arrange the same vertical space to the same household to avoid noise through floor.
    d.Ventilation Performance:Shrink the depth of each interim-house, increase the distance between building , use a fan or an air-conditioner and Lift up the building .
    e.Lighting Efficiency:Increase the area of opening, apple the shelter on the window install lighting equipment at both indoors and outdoors. Water resistance:The secondhand ship container should be finely repaired before reused. Seam filling should be carefully done. Lift up the building .
    f.Fire Resistance:In the interior, apply material of better fire resistance property like calcium silicate boards with proper partition wall and ceiling construction like light-steel construction.

    B. Manufacture dimension
    a. Hire local manpower:(1)Produce process :Adopt on-site process.(2)Arrangement of manpower :Assign job according to the degree of difficulty of construction method.
    b. Construction safety :Assign job according to the degree of safety of construction method.
    c. Construction simplification:Adopt semi-precast produce process of complete the body’s part in the factory and produce other parts on site to reduce the interface between different parts. Reduce the variety of materials. Choose construction of simpler method such as applying twistlocks on the foundation.
    d. Time economy:(1)Settlement strategy:Manufacture and store interim-housing before needed (2)Produce process: Adopt precast process.(3)Choice of construction : Adopt fast-built construction like choose the precast unit in the bathroom
    e. Reuse ability:Separate the construction interface by each container and apply recyclable construction so as to reduce the degree of destroy when reuse.

    摘要 I 誌謝 V 目錄 VII 表目錄 XI 圖目錄 XIII 第一章 緒論 1 1-1研究動機與目的 1 1-1-1研究動機 1 1-1-2研究目的 2 1-2相關文獻回顧 3 1-2-1構法計畫相關文獻 3 1-2-2中繼屋相關文獻 3 1-2-3貨櫃建築相關文獻 5 1-3研究計畫 6 1-3-1研究範圍 6 1-3-2研究內容 6 1-3-3研究流程 7 第二章 貨櫃於建築之應用 9 2-1前言 9 2-2貨櫃應用於建築物之發展 9 2-2-1 貨櫃之基本認知 9 2-2-2貨櫃應用於建築物之發展 21 2-3貨櫃應用於中繼屋之發展與現況 24 2-3-1中繼屋之基本認知 24 2-3-2貨櫃於中繼屋之運用 38 2-4小結 40 第三章 初步貨櫃中繼屋構法計畫 41 3-1前言 41 3-2構法計畫 41 3-2-1構法計畫之基本概念 41 3-2-2構法計畫之流程 45 3-3貨櫃中繼屋之構造系統 46 3-2-1 貨櫃中繼屋之主要構造 46 3-4初步貨櫃中繼屋構法計畫架構 50 3-4小結 52 第四章 貨櫃建築與中繼屋之案例調查 53 4-1調查計畫 53 4-1-1調查目的 53 4-1-2調查內容與方法 53 4-2貨櫃建築方面之調查與結果 55 4-2-1第一階段-貨櫃公司問卷調查 55 4-2-2第二階段-貨櫃建築與貨櫃改裝公司現場調查 56 4-2-3調查結果 57 4-3中繼屋方面之調查與結果 68 4-3-1中繼屋基地調查與相關參與者訪談 68 4-3-2調查結果整理 70 4-4小結 73 第五章 貨櫃中繼屋構法計畫之分析與檢討 75 5-1前言 75 5-2貨櫃中繼屋構法計畫之模擬 75 5-2-1規劃階段 77 5-2-2基本設計階段 83 5-2-3細部設計階段 94 5-2-4施工、生產階段 114 5-3貨櫃應用於中繼屋之分析與檢討 117 5-3-1貨櫃應用於中繼屋機能面相關課題 117 5-3-2貨櫃應用於中繼屋生產面相關課題 119 5-4小結 124 第六章 結論 127 6-1結論 127 6-2後續研究建議 132 參考文獻 133 附錄 137

    中文文獻(c)

    期刊論文(CT)
    【CT1】 姚仁祿、陶石良
    〈建築物內部隔間牆乾式施工法之推動〉內政部建築研究所,1992.11
    【CT2】 蘇杰鳴
    〈國內輕鋼構住宅樓板之研究〉,碩士論文,成功大學,2002.06
    【CT3】 李建良
    〈臨時性建築構造體與基層之間介面之探討-以台灣921地震救災組合屋為例〉,碩士論文,國立台北科技大學,2002
    【CT4】 陳明宏
    〈臨時住宅室內舒適音、溫熱環境之現況調查與評估研究─以台灣九二一大地震受災區為例〉,碩士論文,淡江大學,2002.06
    【CT5】 程靜如
    〈臨時住宅室內溫熱環境調查與改善對策探討之研究─以台灣九二一大地震災區為例〉,碩士論文,淡江大學,2002.06
    【CT6】 洪亮辰
    〈國內低層輕鋼構住宅外牆施工界面整合之研究〉,碩士論文,成功大學,2002.07
    【CT7】 劉宇傑
    〈輕鋼構住宅構工法初步研究〉,碩士論文,成功大學,2002.07
    【CT8】 翁嘉陽
    〈貨櫃在低層住宅之應用研究〉,碩士論文,成功大學,2004.06
    【CT9】 吳昱洲,
    〈震災後中長期收容場所空間規劃之研究〉,碩士論文,國立台北科技大學,2007
    【CT10】 陳伯勳
    〈建築分間牆隔音性能與法規應用之研究〉,中華民國建築學會「建築學報66 期增刊(技術專刊)」,75~89 頁,2008
    【CT11】 任成
    〈緊急安置用臨時住宅之構法研究〉,碩士論文、台灣科技大學,2010.07
    【CT12】 陳柏宗
    〈極端氣候下複合型災害防治之研究-中繼屋規劃設置與災民生活重建關係之研究〉,頂尖大學研究計畫,國立成功大學,2011
    【CT13】 梁高僑
    〈貨櫃住宅居民對貨櫃再利用的情況與問題之研究〉,碩士論文,南華大學2011.06
    【CT14】 許志豪
    〈貨櫃應用於臨時住宅課提與設計提案之研究〉,碩士論文,國立台北科技大學,2012

    專書(CB)
    【CB1】 建築設計資料集編委會
    〈建築設計資料集第八冊建築各部構造〉建築情報雜誌社,1999
    【CB2】 埃斯科‧米耶蒂寧‧瑞斯托‧薩爾尼
    〈Use of Steel in House Building鋼結構住宅〉凌珀譯,天津大學出版社,2006.10
    【CB3】 楊仁元等人
    〈專題製作理論與呈現技巧〉,2007.09
    【CB4】 吳卓夫、葉基棟
    〈營造法與施工 上〉茂榮書局,2011.05
    法令(CL)
    【CL1】 立法院
    〈九二一震災重建暫行條例〉,2000.02
    〈災害防救法〉,2000.06
    〈莫拉克颱風災後重建特別條例〉
    【CL2】 內政部營建署,2009
    〈重大災害災民安置及住宅重建原則〉,2005
    〈臨時住宅興建管理作業要點〉,2009
    〈莫拉克颱風災後家園重建計畫〉,2010
    【CL3】 中華民國國家標準
    〈CNS 3747 貨櫃語彙〉

    日文文獻(JB)
    【JB1】 內田祥哉等
    〈建築構法計畫〉,彰國社,1985
    【JB2】 日本建築學會
    〈工業化住宅の構法計畫〉,1984
    【JB3】 真鍋恒博
    〈圖解建築構法計畫講義〉,彰國社,1999
    【JB4】 大野隆司
    〈新版建築構法計畫資料〉,市ケ谷出版社,2007
    【JB5】 板茂建築設計
    〈多層仮設住宅モデルルーム公開のお知らせ〉,2011.07
    【JB6】 黒川めぐみ、小松幸夫
    〈応急仮設住宅の供給システムに関する考察〉,学術講演梗概集. F-1, 都市計画, 建築経済・住宅問題,vol.2009, pp.1361-1362, 2009.07.20
    【JB7】 齊藤慶伸、岡本和彦、栗原理沙
    〈K市H仮設住宅団地におけるケアゾーンの空間利用に関する研究〉,日本建築学会大会学術講演梗概集,2012.07

    英文文獻(E)
    法令(EL)
    【EL1】 Federal Emergency Management Agency U.S. Department of Homeland Security
    〈The National Disaster Housing Strategy(NDHS),2009.01

    網路資料(W)
    中文網站(WC)
    【WC1】 長榮海運http://www.evergreen-marine.com/tw/
    【WC2】 龍騰貨櫃平台:集裝箱的歷史發展 http://www.lotuscontainers.com/
    【WC3】 竹山迦南美地官網http://ts921.meworks.cc/
    【WC4】 九二一網路博物館http://921.gov.tw/home/index.html
    【WC5】 行政院莫拉克颱風災後重建推動委員會 http://88flood.www.gov.tw/index.php
    【WC6】 維基百科http://en.wikipedia.org/
    【WC7】 大人物http://daman.cool3c.com/node/64117
    【WC8】 寧波傑納爾船舶配件有限公司http://generallashing.b2b.youboy.com/
    【WC9】 船舶百科http://wiki.eworldship.com/index.php
    【WC10】 泰州江海船舶設備有限公司http://www.xyship.com/xy/index.asp
    【WC11】 大視界http://dsj.voc.com.cn/article/201112/201112151154343654_8.html
    【WC12】 金禾工業有限公司http://cn.made-in-china.com/
    【WC13】 台東中繼屋 災民重建自己來
    http://www.archifield.net/vb/showthread.php?5553-%E5%8F%B0%E6%9D%B1%E4%B8%AD%E7%B9%BC%E5%B1%8B-%E7%81%BD%E6%B0%91%E9%87%8D%E5%BB%BA%E8%87%AA%E5%B7%B1%E4%BE%86
    【WC14】 阿里巴巴http://detail.china.alibaba.com/offer/705872768.html
    【WC15】 財團法人台灣營建研究院http://www.tcri.org.tw/tcriWeb/about02.htm
    【WC16】 順鵬五金工具有限公司http://detail.1688.com/offer/1023763463.html
    【WC17】 築龍室內http://down6.zhulong.com/tech/detailprof131791SN.htm

    外文網站(WA)
    【WA1】 Eser Gemi http://www.esergemi.net/subcat.asp?valueID=8
    【WA2】 R one studio http://ronestudio.wordpress.com/
    【WA3】 DIY Trade http://www.diytrade.com/china/pd/1457688/bridge_fitting.html
    【WA4】 http://www.ramspreaders.com/news22.html
    【WA5】 Tempo Housing http://www.tempohousing.com/
    【WA6】 All House Desigh http://allhousedesign.com/
    【WA7】 LOT-EK http://www.lot-ek.com/PUMA-CITY
    【WA8】 Muvbox http://www.muvbox.ca/en/
    【WA9】 【東日本大震災】レポートNo.162
    http://miyagijishin.seesaa.net/article/257369526.html
    【WA10】 ある建築家。。。08 その4
    http://eyekirara.wordpress.com/2013/01/17/%E3%81%82%E3%82%8B%E5%BB%BA%E7%AF%89%E5%AE%B6%E3%80%82%E3%80%82%E3%80%82%EF%BC%90%EF%BC%98%E3%80%80%E3%81%9D%E3%81%AE%EF%BC%94/
    【WA11】 EX-CONTAINER PROJECT http://exc.ysmr.com/top_e/

    下載圖示 校內:2019-01-16公開
    校外:2019-01-16公開
    QR CODE