簡易檢索 / 詳目顯示

研究生: 吳祥生
Wu, Hsiang-Sheng
論文名稱: 5代彩色濾光片製程之真空氣泡問題的改善
Improvement on VCD Bubble Problems in G5 Process of Color Filter
指導教授: 趙隆山
Chao, Long-Sun
學位類別: 碩士
Master
系所名稱: 工學院 - 工程科學系碩士在職專班
Department of Engineering Science (on the job class)
論文出版年: 2013
畢業學年度: 101
語文別: 中文
論文頁數: 58
中文關鍵詞: 彩色濾光片田口實驗真空氣泡
外文關鍵詞: Color Filter, Taguchi Method, VCD Bubble
相關次數: 點閱:116下載:4
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 面板產業屬於台灣的重點高科技業,自90年代開始發展以來,世界上的TFT-LCD面板幾乎由台灣、日本、南韓的面板廠所提供,在秉持著大者恆大的信念下,各面板廠無不積極的擴充產能,而產能競賽2008年的金融海嘯前到達了頂點,而面板的平均售價ASP(Average Sale Price)更是跌跌不休,造成各面板廠做越多賠越多的情況,於是乎各面板廠停止產能競賽,取而代之的是各種新技術、高規格、高ASP的產品產生,如IPS、IGZO、AHVA到最近的High PPI (Pixel Per Inch),以15.6吋的監視器面板報價,高解析度320PPI的產品報價比一般解析度200PPI報價高出約50~60%,所以在高PPI未來會成為主流規格的前提下,客戶對於Defect的規格也更加嚴苛,尤其是WP(White Point)。
    本文主要研究改善對象為,五代的彩色濾光片真空氣泡的改善,在現行的機台配置下,搭配田口實驗方法,期望以最小成本來達到真空氣泡發生率零化可能。

    TFT-LCD is a very important high-tech industry in Taiwan. The whole world TFT-LCD panels are almost provided by Taiwan, Japan and South Korea since 1990. Each panel manufacturer actively expanded the production capacity based on the conviction that the bigger the stronger. The expansion competition reached the apex before the financial tsunami of 2008 and then the average sale price stumbled endlessly. This let the manufacturers make more panels and lose more money and therefore the manufacturers stopped the competition. Instead of the capacity contest, the high tech, high specification, high ASP products are now on the way, such as IPS, IGZO, AHVA and high PPI products. The price of the 15.5 inch monitor with the high resolution of 320 PPI is 50% to 60% higher than that of the one with the normal resolution of 200 PPI. Consequently, under the precondition that the high PPI will become the main-stream specification, the customer will ask the stricter defect specification, especially the WP (white point) one.
    The main purpose of the thesis is to improve the VCD bubble problems in G5 process of color filter. Under the current equipment layout, the bubble problems are studied experimentally with the assistance of the Taguchi experiment method. It is expected that the modified method of zero VCD bubble and low cost could be found.

    目錄 摘要 II Abstract III 誌謝 IV 目錄 VI 圖目錄 IX 表目錄 XII 第一章 緒論 1 1.1 研究動機 1 1.2 面板產業市場現況分析 2 1.3 研究目的 6 第二章 面板關鍵技術介紹及分析 8 2.1 IPS(In Plane Switching) 8 2.2 IGZO(氧化銦鎵錫) 10 2.3 AMOLED(主動式有機發光顯示器) 12 第三章 實驗設備與方法 14 3.1 實驗方法-田口品質工程 14 3.2 TFT-LCD製程簡介 20 3.2.1 LCD製作流程 20 3.3 CF製程介紹 23 3.4 CF主要製程設備介紹 26 3.4.1 ESC(Exact Spinless Coat)光阻塗佈機 26 3.4.2 VCD (Vacuum Dry) 26 3.5 CF製程主要DEFECT介紹 27 3.5.1 BM BP(Black Point) 27 3.5.2 BM WP(White Point) 28 3.5.3 Gel(凝膠) 28 3.5.4 黑膠 29 3.5.5 氣泡(Bubble) 29 3.5.6 真空氣泡(Vacuum Bubble) 30 3.6 實驗數據收集及分析 30 3.6.1 真空氣泡發生狀況調查 30 3.6.2 Defect資料收集及分析 32 第四章 實驗設計與結果討論 34 4.1 實驗規劃 34 4.1.1 固定因子選定說明 34 4.1.2 控制因子選定說明 36 4.1.3 因子設定 37 4.2 實驗步驟 37 4.3 驗證實驗 38 4.4 實驗數據分析與討論 42 4.5 第二次實驗條件設計 43 4.5.1 控制因子選定說明 43 4.6 驗證實驗 46 4.7 實驗數據分析與討論 50 4.7.1 A因子(檔塊形狀) 50 4.7.2 B因子(Slow Valve角度) 51 4.7.3 C因子(Main Valve角度) 51 4.7.4 D因子(基板距底板高度) 52 4.8 最佳化條件驗證結果 53 第五章 結論與未來研究 54 5.1 結論 54 5.2 未來研究 56 參考文獻 57

    [1] 楊仁杰,2013年全球手機用面板分析,Digitimes,2012年9月。
    [2] 群創光電,http://www.innolux.com/Pages/TW/Technology。
    [3] 游念玲,2012年日本中小尺寸LCD重點發展IGZO與LTPS高精
    細技術,Digitimes,2012年5月。
    [4] Kelly Pan,AMOLED技術分析,財經知識庫,2012年4月。
    [5] AUO,友達光電,http://www.auo.com/?sn=116&lang=zh-TW
    [6] 李輝煌,田口方法-品質設計的原理與實務,高立出版社,2011年。
    [7] 顏單青,新世代彩色濾光片製程技術發展現況與分析,化工技術
    第51卷第1期2004年2月, pp9~28
    [8] 游孟傑譯,TFT彩色液晶顯示器,全華圖書,2008年5月
    [9] 顧鴻壽,光電液晶顯示器技術基礎及應用,新文京開發,2004年3月,pp61~68,pp140~167,pp274~304
    [10] 嚴楚材、鄺東元、顧鴻壽、方昭訓,彩色濾光片塗佈技術簡介,真空科技18卷2期,2005年8月,pp4~9
    [11] 駱文欽、許明德 第五代以上彩色濾光片技術發展趨勢 電子與材料第17期2003年2月 pp5~62
    [12] 駱文欽,“五代以上之CF技術“,電子與材料雜誌第17期,2004
    [13] 田民波,TFT LCD 面板設計與構裝技術,台灣五南出版股份有限公司出版,2008年
    [14] 邱鴻儒,“應用田口方法改善彩色濾光片製程問題“,逢甲大學資訊電機系碩士論文,2006
    [15] J yh-Wen Shiu, Dai-Liang and Ching-Yung Liu etc.,A Simple and High Quality Multigap Color Filter, ASID’99, P351~P354,1999
    [16] Takanori Kudo,Yuki Nanjo,Yuko Yamagichi,Hidemasa Yamaguchi,Wen-Bing Kang and Georg Pawlowski, Fabrication Process of Color Filter Using Pigment Photoresists. Jpn. .Appl.Phys. Vol.37 1998 pp3594~3603
    [17] Ram W. Sabnis, Color Filter Technology for liquid crystal displays, Displays vol20,1999, pp119~129
    [18] Nagase Akira, Yoshioka Masahiro, “Resin black matrix, color filter, liquid crystal display device and black coating film composition”, Japan Patent NO. 2004004651, 2004.
    [19] Ito Kazunori, Kitaoka Naoyuki , “Resister composition for black matrix”, Japan Patent NO. 2003344996, 2003

    下載圖示 校內:2017-09-06公開
    校外:2018-09-06公開
    QR CODE