簡易檢索 / 詳目顯示

研究生: 陳韋綸
Chen, Wei-Luen
論文名稱: 硫酸鈣骨填充物性質研究
Investigation of properties of calcium sulfate bone substitute
指導教授: 陳瑾惠
Chern Lin, Jiin-Huey
朱建平
Ju, Chien-Ping
學位類別: 碩士
Master
系所名稱: 工學院 - 材料科學及工程學系
Department of Materials Science and Engineering
論文出版年: 2006
畢業學年度: 94
語文別: 中文
論文頁數: 107
中文關鍵詞: 硫酸鈣骨取代物生醫材料
外文關鍵詞: bone substitute, calcium sulfate
相關次數: 點閱:129下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 硫酸鈣骨取代物應用在修補人體骨骼缺陷的歷史可以回溯到19 世紀末,因為硫酸鈣良好的生物相容性跟引骨性,使得硫酸鈣骨取代物在修補人體骨骼缺損上有非常好的表現。
    本研究第一階段主要嘗試在實驗室中自行製作半水硫酸鈣粉末,並在二水硫酸鈣粉末中加入去離子水,可以加快反應速率。實驗發現,如果事先在二水硫酸鈣熱處理的粉末中加入適量的去離子水,反應時間由原本的六小時縮短為一小時,大幅的簡短了半水硫酸鈣的製作時間。
    第二階段則是製作出一有別於市面上抗壓強度僅23MPa 的醫用硫酸鈣,經研究發現,在硬化劑中加入適當濃度的添加劑後,再以高壓製程製作,硫酸鈣骨取代物強度可達113MPa,大大的增加了硫酸鈣骨取代物的應用性。

    Being the biomaterial, Calcium sulfate bone substitute can trace back to 19 century. Because it’s excellent biocompatibility and osteoconductivity, calcium sulfate bone substitute has very well performance in repairing human
    bone defect.
    In the first part of this research, just trying to make calcium sulfate hemihydrate in laboratory. And I found that if add some water in the process,
    the time can be short from six hours to one hour.
    In the second part of my research, I’m trying to make some calcium
    sulfate bone substitute that got 113 MPa in compression strength. Just different from the market that can only get 23MPa in compression strength.

    中文摘要……………………………………………………………….……1 abstrsct…………………………………………………………………….2 致謝………………………………………………………………………….3 總目錄……………………………………………………………………….4 圖目錄…………………………………………………………………….…8 表目錄………………………………………………………………………11 第一章 前言……………………………………………………………….12 1-1 生醫材料的定義………………………………………………………12 1-2 生醫材料的分類………………………………………………………14 1-2-1 金屬材料(metal)……………………………………………..…14 1-2-2 高分子材料(polymer)……………………………..……………15 1-2-3 陶瓷材料(ceramic)………………………………..…..……….15 1-2-4 複合材料(composite)……………………………..……………15 1-3 生醫陶瓷的種類……………………………………….…………….18 1-4 理想生醫材料要件………………………………………….……….22 1-4-1 人工骨取代物材料性質與製程的要求………………….……….24 1-5 人體骨骼…………………………………………………….……….27 1-5-1 骨生理及骨骼創傷與癒合………………………………..…….28 1-6 生醫材料發展簡史……………………………………….………….32 第二章 硫酸鈣簡介…………………………………………….………..36 2-1 醫用硫酸鈣發展歷史…………………………………….………….36 2-2 理論回顧…………………………………………………….……….38 2-2-1 硫酸鈣的相轉換機制……………………………….…………….38 2-2-2 硫酸鈣的煆燒特性………………………………….…………….39 2-2-3 α與β半水硫酸鈣特性的比較……………………….………….41 2-2-3-1 製造方法………………………………………….…………….41 2-2-3-2 半水硫酸鈣的性質差異………………………….…………….42 2-2-3-3 半水硫酸鈣的水合硬化過程…………………….…………….42 2-3 硫酸鈣的作用機制…………………………………….…………….48 2-3-1 脫水機制的分子觀……………………………….……………….48 2-3-2 硫酸鈣脫水的化學方程式……………………….……………….49 2-3-3 結晶結構的影響……………………………………….………….49 2-4 粉液混合過程對反應的影響…………………………….………….53 2-4-1 不同添加劑與硫酸鈣結晶過程的影響………………….……….53 2-4-2 不同粉液比(powder - to liquid - ratio, P/L)對硫酸鈣性質 的影響……………………………………………….…………..54 2-5 磷酸根對二水硫酸鈣生成反應的影響…………….……………….57 2-6 硫酸鈣在生醫材料上的應用………………………………….…….60 2-6-1 有添加硫酸鈣的多相複合生醫材料………………….………….60 2-6-1-1 CaSO4.0.5H2O+α-TCP………………………….………………61 2-6-1-2 CaSO4.2H2O+α-TCP…………………………….………………61 2-6-1-3 CaSO4.0.5H2O+HA……………………………….……………...62 2-6-2 硫酸鈣在骨移植術上的應用……………………………………62 2-6-3 硫酸鈣促進骨再生機制.…………………………………………64 2-7 研究目的…………………………………………………………..…67 第三章 實驗流程與方法………………………………………………….68 3-1 實驗流程………………………………………………………….….68 3-1-1 製作半水硫酸鈣……………………………………………………68 3-1-2 硫酸鈣骨取代物試片的製作與測試………………………………68 3-2 原料…………………………………………………………………..71 3-2-1 使用藥品及其來源……………………………………….……….71 3-2-2 硬化劑………………………………………………………….….71 3-3 實驗步驟與分析原理……………………………………….……….72 3-3-1 抗壓強度測試…………………………………………….……….72 3-3-2 掃描式電子顯微鏡(SEM)分析……………………….…………73 3-3-3 XRD繞射分析………………………………………………….……75 3-4 利用高溫爐與壓力釜製作半水硫酸鈣…………………….……….77 3-4-1 α-型半水硫酸鈣……………………………………….…………77 3-4-2 β-型半水硫酸鈣……………………………………….…………77 第四章 結果與討論………………………………………….……………79 4-1 自行製作半水硫酸鈣…………………………………….………….79 4-1-1 製作α-型半水硫酸鈣………………………………….…………79 4-1-1-1 以普通方式α-型製作半水硫酸鈣………………….………..79 4-1-1-2 在二水硫酸鈣粉末中,加入去離子水對反應的影響…….….80 4-1-2 製作β型半水硫酸鈣…………………………………….……….80 4-1-2-1 以普通方式β-型製作半水硫酸鈣…………………….………81 4-1-2-2 在二水硫酸鈣粉末中,加入去離子水對反應的影響………..81 4-2 不同前處理對硫酸鈣骨取代物性質的影響……………….……….88 4-2-1 試片經不同溫度熱處理後強度的改變………………….……….88 4-2-2 硫酸鈣骨取代物在人工體液中的強度變化情形…………….….89 結論…………………………………………………………….………….99 參考資料………………………………………………….………………100 圖目錄 圖1-4-1. 人工材料與骨組織間的生物反應示意圖…………….………26 圖1-5-1. 骨骼切面圖………………………………………….……..…29 圖1-5-2. 人體骨骼…………………………………………….…………30 圖2-2-1. 硫酸鈣及其衍生物於不同溫度下在水中之溶解度…….…45 圖2-2-2. α型與β型硫酸鈣水合反應之放熱峰……………….……46 圖2-2-3. 硫酸鈣在不同溫度及條件下熱處理的產物…………….…47 圖2-2-4. α型與β型半水石膏之熱差曲線圖……………….…….…47 圖2-3-1. 硫酸鈣衍生物與其結晶結構…………………….………….50 圖2-3-2. 二水硫酸鈣之結晶結構圖…………………………………...51 圖2-3-3. 無水硫酸鈣之結晶結構圖……………………….……………51 圖2-3-4. 半水硫酸鈣的繞射峰圗…………………………………….…52 圖2-3-5. 二水硫酸鈣的繞射峰圗…………………………….…………52 圖2-4-1. 半水硫酸鈣之混合水量與硬化後強度關係圖…….………55 圖2-4-2. 水溶液含量對α-TCP-CSD 複合材料工作時間的影響……..56 圖2-4-3. 定溫下,四種生醫陶瓷在不同酸鹼值下的溶解度……….…56 圖2-5-1. 利用溶液混濁程度判斷在相同時間下,有添加與沒有添加ATMP (100ppm)對CSD 生成量的影響………………………..….58 圖2-5-2. 相同的過飽和比(supersaturation ratio)下有無添加ATMP 9對二水硫酸鈣成核速率的影響……………….…………….59 圖2-5-3. 相同的過飽和比(supersaturation ratio)下有無添加ATMP 對 形成的二水硫酸鈣核半徑(radius of nucleus)的影響…………………………………………………….……….59 圖2-6-1. α-TCP-CSD 骨水泥在人工體液中的變化………………..….63 圖2-6-2. 抗壓強度與CaSO4・ 2H2O/ α-TCP 相對含量之關係…….…..65 圖 2-6-3 添加HA 的多寡對抗壓強度之影響………………….….…….66 圖3-1-1 實驗流程圖part I,製作半水硫酸鈣………………………..69 圖3-1-2 實驗流程圖 Part II,硫酸鈣骨取代物試片的製作與測試.…70 圖3-3-1 掃描式電子顯微鏡作用示意圖……………………….……….74 圖3-3-2 X-RAY 繞射分析儀示意圖……………………………….…….76 圖4-1-1. 將二水硫酸鈣粉末置於130℃高壓蒸氣中,經過不同時間的熱 處理後,進行XRD 分析…………………………………….…82 圖4-1-2. 將10g 的二水硫酸鈣粉末與5ml 的去離子水混和後,置於130 ℃高壓蒸氣中,經過不同時間的熱處理後,進行XRD 分析….83 圖4-1-3. 將二水硫酸鈣粉末置於130℃乾燥空氣中,經過不同時間的熱 處理後,進行XRD 分析……………………………………..84 圖4-1-4. 將10g 的二水硫酸鈣粉末與5ml 的去離子水混和後,置於130 ℃乾燥空氣中,經過不同時間的熱處理後,進行XRD 分析….85 10 圖4-1-5. α-型半水硫酸鈣SEM 微結構圖……………………………..86 圖4-1-6. β-型半水硫酸鈣SEM 微結構圖……………………………...87 圖4-2-1. 硫酸鈣骨取代物經過熱處理後的強度變化……………….…90 圖4-2-2. 硫酸鈣骨取代物在不同溫度下熱處理一小時的XRD 繞射圖…91 圖4-2-3. 硫酸鈣骨取代物在經過不同溫度與不同時間熱處理後的抗壓 強度分佈圖…………………………….…………………...92 圖4-2-4. 硫酸鈣骨取代物在高溫爐中在定溫100℃,進行不同時間熱處 理的XRD 繞射圖……………………………………….………93 圖4-2-5.硫酸鈣骨取代物浸泡於人工體液中不同時間之強度變化圖…94 圖4-2-6. 硫酸鈣骨取代物在人工體液中浸泡後的XRD分析圖形….....95 圖4-2-7.硫酸鈣骨取代物在人工體液中浸泡不同時間後的SEM 微結構分 析……………………………………………………………….96 圖4-2-8.硫酸鈣骨取代物在人工體液中浸泡不同時間後的SEM 微結構分 析……………………………………………………………….97 圖4-2-9.硫酸鈣骨取代物在人工體液中浸泡不同時間後的SEM 微結構分 析……………………………………………………………….98 表目錄 表1-2-1. 金屬、陶瓷、高分子及複合材料之性質比較…………….……16 表1-2-2. 生醫材料的分類與應用………………………………….……17 表1-3-1. 生醫陶瓷各種性質及用途之综合比較………………….……20 表1-3-2. 目前在應用上常見的生醫陶瓷…………………………….…21 表1-5-1. 人體骨骼成份表…………………………………………….…30 表1-5-2. 自然骨的機械性質………………………………….…………31 表1-6-1. 有關生醫植入材料的重要發展簡列, Part I…………..……34 表1-6-2. 有關生醫植入材料的重要發展簡列, Part II.. ….….……35 表2-7-1. 目前市面上販售骨取代物機械性質一覽表………………….67 表3-2-1. 實驗所用藥品名稱及來源…………………………….….….72 表3-2. 一般常用之人工體液…………………………………….………78

    Amathieu L. and R. Boistelle, "Crystallization Kinetics of Gypsum
    from Dense Suspension of Hemihydrate in Water, " Journal of
    Crystal Growth 88: 184,1988.
    Amathieu L. Boiste R.: lle, J. Crystal Growth 79: 169, 1986.
    Breed AL. "Experimental production of vascular hypotension, and
    bone marrow and fat embolism with methylmethacrylate cement."
    Traumatic hypertension of bone. Clin Orthop 102: 227-44, 1974.
    Brown WE, Chow LC. "A new calcium phosphate water-setting cement.
    " In: Brown PW, editor. Cements research progress 1986.
    Westerville, OH: Am Ceram Soc;. p 352–379. 1987
    Buchardt H “"The biology of bone graft repair. " Clinical Orthop
    174: 28-42, 1983.
    Chunjuan Gao, Jianping Gao, Xiudong You, Shujuan Huo, Xiulan Li,
    Yang Zhang, Wenhai Zhang. "Fabrication of calcium sulfate/PLLA
    composite for boneRepair. " J Biomed Mater Res 73(A): 244–253,
    2005.
    Combe E.C. Smith D.C., Appl J. Chem. 14: 544, 1964.
    Combe E.C. Smith D.C., Appl J. Chem. 15: 367, 1965.
    Combe E.C. Smith D.C., Appl J. Chem. 16: 73, 1966.
    Carlson J. Nilsson M. Fernandez E. Planell J.A. "An ultrasonic
    pulse-echo technique for monitoring the setting of CaSO4-based
    bone cement." 2002.
    Carlson J. Nilsson M. Fernandez E. Planell J.A.
    "Planell,Monitoring the Setting of Injectable
    Calcium-BasedBone Cements Using Pulse-Echo Ultrasound." 2002.
    Elisabeth Badens, Stephane Veesler, Roland Boistelle.
    "Crystallization of gypsum from hemihydrate in presence of
    additives." Journal of Crystal Growth 99: 704-709, 1999.
    EL-SHALL H., RASHAD M.M. ABDEL-AAL E.A. "Effect of phosphonate
    additive on crystallization of gypsum in phosphoric and
    sulfuric acid medium." Cryst. Res. Technol. 37(12): 1264–1273,
    2002.
    Henman P, Finlayson D. Ordering allograft by weight: "Suggestions
    for the efficient use of frozen bone-graft for impaction
    grafting. " J Arthroplasty. 15: 368-371, 2000.
    Hench LL. Bioceramics: from concept to clinic. J Am Ceram Soc 74:
    1487-1510, 1991.
    Hulbert SF, Hench LL, Forbers D, Bowman LS. "History of
    bioceramics. " Ceram Internat 8: 131-140, 1982.
    Hu RW, Bohlman HH. "Fracture at the iliac bone graft harvest site
    after fusion of the spine. " Clin Orthop. 309: 208-213, 1994.
    Jonck LM, Grobbelaar CJ. "The biological compatibility of glass
    ionomer cement in joint replacement." Clin. Mater .; 4: 85-107,
    1989.
    Jarcho M. "Calcium phosphate ceramics as hard tissue." Clin.
    Orthop. Rel. Res. 157: 259-279, 1981.
    Kokubo T. "Recent progress in glass-based materials for
    biomedical applications." The Centennial Memorial Issue of The
    Ceramic Society of Japan 99: 965-973, 1991.
    Kuznetsova L.F. and O.I. Lomovskii, "Thermal Breakdown of Gypsum
    Crystals." Inorganic Materials 21: 1534-1536, 1985.
    Katthagen B.D. "Bone regeneration with bone substitutes",
    Springer-Verlag, Berlin, 1987.
    Lewry A.J. and J. Williamsoon, "The setting of gypsum plaster
    partIII the effect of additives and impurities."J of materials
    science. Vol 29, p6085~6090, 1994.
    103
    McConnell J.D.C. Astill D.M. and Hall P.L. "The Pressure
    Dependence of the Dehydration of Gypsum to Bassanite.
    Mineralogical Magazine." 51: 453-457, 1987.
    Mongiorgi R and Krajewski A. "Mineralogical alterations in
    osteoporotic bone tissue structure." Biomaterials. 2: 147-151,
    1981.
    Nilsson M. Ferna´ndez E. Sard S. Lidgren L. Planell1J.A.
    "Characterization of a novel calcium phosphate/sulphate bone
    cement." 2001
    Nussbaum DA, Gailloud P, Murphy K. "The chemistry of acrylic bone
    cements and implications for clinical (c1)use in image-guided
    therapy. J Vasc Interv Radiol 15:121–126, 2004.
    Nilsson M., Ferna´ndez E. Sarda S. Lidgren 1L., Planell J.A.
    "Characterization of a novel calcium phosphate/sulphate bone
    cement." J Biomed Mater Res 61: 600–607, 2002.
    Nilsson M., Wielanek L., J.S. Wang, K. E. Tanner, L. Lidgren.
    "Factors Influencing the Compressive Strength of an Injectable
    Calcium Sulfate-Hydroxyapatite Cement." Journal of Materials
    Science: Materials in Medicine 14: 399-404, 2003.
    104
    P. Vincenzini, "Ceramics in sub-stitutive and reconstructive
    surgery." Elsevier Science Publishers B.V, 1991.
    Park JB. Biomaterials, An Introduction. Plenum Press. New York,
    1979.
    Park JB. Biomaterials Science and Engineering. Plenum Press. New
    York and London, 1985.
    Pierson AP, Bigelow D & Hamonic M Bone grafting with boplant.
    Results in thirty-three cases. J Bone & Joint Surg 50(B):
    364–368, 1968.
    Peltier L.F. and Jones R.H. "Treatment of unicameral bone cysts
    by curettage and packing with plaster of Paris." J.Bone Jt. Surg,
    vol 60, p820~822, 1978
    Peltier L.F. "The use of plaster of Paris to fill defects in bone."
    Clin. Orthop. Vol21, p1~29, 1961,
    Ralph W.G. Wyckoff. Crystal Structures 504-507, 643-644, 1981.R.
    A. KUNTZE. Nature (London) 211: 406, 1966.
    Rateitschak KH, Wolf HF. "Color Atlas of Dental Medicine. Thieme
    Medical Publishers." 1995.
    Rashad M.M. Baioumy H.M. and Abdel-Aal E. A. "Structural and
    spectral studies on gypsum crystals under simulated conditions
    of phosphoric acid production with and without organic and
    inorganic additives Cryst." Res. Technol. 38(6): 433 – 439,
    2003.
    Roy D.M. Linnehan S.K., "Hydroxyapatite formed from coral
    skeletal carbonate by hydrothermal exchange. " Nature 247:
    220-222, 1974.
    Soballe K. "Hydroxyapatite ceramic coating for bone implant
    fixation." ACTA Orthopaed Scandin Supplem 64: 1-58, 1993.
    Tadros M.E. Mayes I. Colloid J. Interface Sci. 72: 245, 1979.
    Verlaan JJ, Oner FC, Slootweg PJ, Verbout AJ, Dhert WJ Histologic
    changes after vertebroplasty. J Bone Joint Surg [Am]
    86(A):1230-1238, 2004.
    Vincenzini P. Elsevier,Ceramics in Clinical Applications.
    Amsterdam-oxford-New York-Tokyo.3-27, 1987.
    van Rosmalen G.M., Daudey P.J. and Marchee W.G.J.. "Quantitative
    Description of the Influence of the Inhibitor Concentration on
    the Growth Rate of Calcium Sulfate Dihydrate Crystals in
    Suspension." Industrial Crystallization 81: 147-154, 1982.
    Weijnen M.P.C. and van Rosmalen G.M. "The Role of Additives and
    Impurities in the Crystallization of Gypsum." Industrial
    Crystallization 84, edited by S.J. Jancic and E.J. de Jong,
    Elsevier Science Publishers B.V. Amsterdam, 61-66, 1984.
    Weijnen M.P.C. and van Rosmalen G.M. "The Role of Additives and
    Impurities in the Crystallization of Gypsum." Industrial
    Crystallization 84, edited by S.J. Jancic and E.J. de Jong,
    Elsevier Science Publishers B.V. Amsterdam, 61-66, 1984.
    Weijnen M.P. van Rosmalen G.M. Desalination 54: 239, 1985.
    Weijnen M.P.C. and van Rosmalen G.M. "Adsorption of Phosphonate
    on Gypsum crystals." J. Crystal Growth. 79: 157-168, 1986.
    William R. Moore, Stephen E. Graves, GegoryiI. Bain. "Synthetic
    Bone Graft Substitutes." ANZ J. Surg 71: 354–361, 2001.
    www.stpeters.k12.nf.ca/skel.jpg
    www.sirinet.net/~jgjohnso/skeleton.html
    www.suntex.com.tw
    www.gec.jp/CTT_DATA/WMON/CHAP_4/html/Wmon-094.html
    Ying. "Nanocrystalline apatites and composite prostheses
    incorporating them, and method for their production." US patent
    6013591, 2000.
    汪建民, 材料分析, 中國材料科學學會, 49, 122, 1998
    林育弘, “硫酸鈣材料對於骨組織修補的應用.” 化工資訊與商情月刊第
    4 期(92 年10 月號)
    周邦彥, “骨科生醫材料之發展與應用.” 技術與訓練27 卷4 期,
    163-171,2002.
    張炳龍, ROSS 組織學, 合記圖書出版社, 147-158, 1991.
    梁智仁, “骨質疏鬆致骨折專治生物材料的研製與市場化." 京港學術
    交流第五十四期, 2002
    梁繼文, 礦物學, 五南出版社, 1984
    黃喜麟, “燃煤電廠脫硫石膏轉化半水石膏之研究.” 1999
    經濟部陶瓷技術手冊Chap.31

    無法下載圖示 校內:2033-08-02公開
    校外:2106-08-02公開
    電子論文尚未授權公開,紙本請查館藏目錄
    QR CODE