| 研究生: |
黃堯堂 Huang, Yao-Tang |
|---|---|
| 論文名稱: |
聚乙烯醇/碳酸鈣 奈米材料的製備與特性 Preparation and Characterisations of PVA/CaCO3 Nanocomposites |
| 指導教授: |
葉茂榮
Yeh, Mou-Yung 黃建文 Huang, Jiann-Wen |
| 學位類別: |
碩士 Master |
| 系所名稱: |
理學院 - 化學系碩士在職專班 Department of Chemistry (on the job class) |
| 論文出版年: | 2007 |
| 畢業學年度: | 95 |
| 語文別: | 中文 |
| 論文頁數: | 75 |
| 中文關鍵詞: | 碳酸鈣 、奈米材料 |
| 外文關鍵詞: | calcium carbonate, Nanocomposites |
| 相關次數: | 點閱:68 下載:5 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究可分為兩個部份,第一部份為合成有機高分子聚乙烯醇poly(vinyl alcohol)簡稱(PVA)/無機化合物CaCO3奈米複合材料;合成原理是先將PVA依照一定比例溶解在水中,在加入氫氧化鈣Ca(OH)2,並通入二氧化碳CO2使得氫氧化鈣變成碳酸鈣CaCO3。藉由CO2進入PVA的方式不同,來達到合成CaCO3粒徑的不同。
第二部份,對此材料進行一些物性測試。如: SEM、TGA、Uv-Vis以及拉力應用等測試。
本研究是利用化學反應,讓CaCO3在聚乙烯醇(PVA)中以極小顆粒形成且分散性佳;同時所製備的高分子奈米複合材料可發現碳酸鈣粒徑小於100nm,符合奈米材料的要求;另一方面,也希望我們所選擇的碳酸鈣和聚乙烯醇對生物是有益處的,而且聚乙烯醇是可以被生物分解的,能符合環境保護的問題,更祈盼未來能夠用聚乙烯醇來取代PVC(聚氯乙烯)。
This thesis can be divided into two parts. For the first part, a series of poly(vinyl alcohol)/CaCO3 Nano- composites were prepared. The synthesis principle is first dissolves PVA according to the certain proportion in the water,and Joins the calcium hydroxide, and passes over the carbon dioxide to cause the calcium hydroxide to turn the calcium carbonate. Because the carbon dioxide enters PVA the way to be different, achieves the synthesis calcium carbonate particle size the difference.
For the second part, thesis Nanocomposites were subsequently characterized by SEM,Vis-Uv,TGA and tensile force.
1. 工業材料, 86年5月,125期。
2. 工業材料, 88年9月,153期。
3. 九十四年度教育部辦理技專校院發展學校重點特色專案補助計畫計畫名稱:可撓式顯示器奈米材料教學與研究專案計畫 徐新興教授
4. B. Li and W. Fan, Materials Research Bulletin 38 1567–1572 (2003)
5. X. F. Qian , J. Yin, J. C. Huang, Y. F. Yang, X. X. Guo and Z. K. Zhu, Materials Chemistry and Physics 68 95–97 (2001)
6. 長春化學(股)公司提供。
7. M. AVELLA , M. E. ERRICO, R. RIMEDIO, JOURNAL OF MATERIALS SCIENCE 39 6133–6136 (2004)
8. J. H. Chang, T. G. Jang, K. J. Ihn, W. K. Lee, and G. S. Sur
Journal of Applied Polymer Science, Vol. 90, 3208–3214 (2003)
9. D. LO´ PEZ, I. CENDOYA, F. TORRES, J. A. TEJADA, C. A. MIJANGOS, Journal of Applied Polymer Science, Vol. 82, 3215–3222 (2001)
10. J. XU, Y. Z. MENG, R. K. LI, Y. XU, A. V. RAJULU, Journal of Polymer Science: Part B: Polymer Physics, Vol. 749–755 (2003)
11. Y. Yin, J. f. Li, Y. C. Liu, and Z. Li, Journal of Applied Polymer Science, Vol. 96, 1394–1397 (2005)
12. S. W. Ali, S. A. R. Zaidi, Journal of Applied Polymer Science, Vol. 98, 1927–1931 (2005)
13. H. H. WANG, T. W. SHYR, and M. S. HU, Journal of Applied Polymer Science, Vol. 73, 2219–2226 (1999)
14. R. W. Oliver,「生物科技大未來」,美商麥格羅‧希爾,台北(2000)。
15.,D.C. Lee, and L.W. Jang, Applied Polymer Science.,1996,61,1117.
16. C. L. Dong and W. J. Lee, J. Appl. Polym. Sci., 61, 1117 (1996)
17. F. Claudia, G. Marco, G. Silvia, R. Giacomo, A. V. Carlo and M. Bernardo, Polymer, 39, 2651 (1998)
18. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi and O. Kamigaito, J. Mater. Res., 8, 1185 (1993)
19. F. Bergaya and F. Kooli, Clay Miner, 26, 33 (1991)
20. R. A. Vaia, H. Ishii and E. P. Giannelis, Chem. Mater., 5, 1694 (1993)
21. M. M. Alesaimi, J. Appl. Polym. Sci., 367 (1997)
22. A. Moet and A. Akelah, J. Mater. Sci., 28, 3589 (1996)
23. Y. Sugahara, S. Satokawa, K. Kuroda and C. Kato, Clays Clay Miner, 36, 343 (1988)
24. C. Kato, K. Kuroda and H. Takahara, Clays Clay Miner, 29, 294 (1981)
25. A. Moet and A. Akelah, Mater. Lett., 18, 97 (1993)
26. A. Akelah, A. Rehab, A. Selim and A. Agag, J. Mol. Cat., 94, 311 (1994)
27. A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi and O. Kamigaito, J. Mater. Res., 8, 1179 (1993)
28. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, T. Kurauchi and O. Kamigaito, J. Appl. Polym. Sci., 49, 1259 (1993)