| 研究生: |
潘靜蓉 Pan, Chin-Jung |
|---|---|
| 論文名稱: |
孟宗竹高溫乾燥後抗彎強度之研究 A Study on the Bending Strength of High-Temperature Dried Moso Bamboo |
| 指導教授: |
曾俊達
Tzeng, Chun-Ta |
| 學位類別: |
碩士 Master |
| 系所名稱: |
規劃與設計學院 - 建築學系碩士在職專班 Department of Architecture (on the job class) |
| 論文出版年: | 2016 |
| 畢業學年度: | 105 |
| 語文別: | 中文 |
| 論文頁數: | 68 |
| 中文關鍵詞: | 竹材抗彎 、抗彎強度 、竹材吸水性 |
| 外文關鍵詞: | Bending Resistance of Bamboo, Bending strength, Water Absorption of Bamboo |
| 相關次數: | 點閱:165 下載:8 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
自二十世紀以來,環保成為顯學,自然建築的走向,節能減碳建築綠化行動方針,以竹代木、以竹代鋼的計畫推廣,使得竹材嚴然成為另一種建築趨勢。竹材供作建材使用的最大關鍵在於竹材的耐候性及耐久性,物理性的高溫乾燥處理方式,符合環保的議題及建築時程上的需求。
竹材經高溫乾燥過程,會對竹材本身細胞組織結構造成化學變化,是否也會影響竹材的抗彎強度及吸水性,本研究將運用科學的實驗方法進行一般處理竹材與經高溫乾燥處理竹材的抗彎強度試驗,尋求數據答案。
研究結果顯示,採用一般處理的竹材在竹材抗彎強度上優於高溫乾燥處理竹材,而同樣為高溫乾燥處理竹材,在抗彎強度上石壁竹略優於奮起湖竹;在竹材吸水性上,經高溫乾燥處理之竹材在短時間內吸水性低於一般處理之竹材。
Environmental protection has become a major concern for society ever since 20th century. The sustainable and natural-oriented architecture which emphasizes energy saving and CO2 reduction, and the projects promoting replacing wood and steel with bamboo, all make bamboo a prevalent material in architecture. The keys of using bamboo as building construction material lie in its weather resistance and durability. Its heat and drying treatment meets the requirement of environmental protection issue and the time frame of construction.
The process of heating and drying changes the bamboo’s cell structure chemically, and it has possible influence on the material’s bending resistance and durability. Therefore, this research tries to verify it through scientific bending resistance experiment of the normally treated and the heat- and drying- treated bamboo.
The results indicate that the normally treated bamboo has higher bending resistance than the heat- and drying- treated bamboo. And with the same heat and drying process, the bending resistance of Shi-Bi Bamboo is higher than Fen-Qi-Hu Bamboo. With respect to water absorption within short period of time, the absorption of heated and dried bamboo is less than normally treated bamboo.
中文文獻
[C01]游家誠,古蹟歷史建築修復施作過程竹材保護棚架系統之研擬與應用,國立成功大學碩士論文,2009。
[C02]黃世孟等,推展竹材建築與落實竹材科技補助研究計畫,內政部建築研究所,2003。
[C03]李銘鐘、周群,高溫乾燥竹材振興竹產業,2010,林業研究專訊 Vo1.17 No.4 P23-24。
[C04]王松永,木材物理學,1986,P35-59。
[C05]黃若如,竹木裝飾材料的防護與美化,中國建材工業出版社出版,1997,P1-22。
[C06]賴建文,孟宗竹條彎曲技術及其加工技藝,國立屏東科技大學木材科學與設計系碩士論文,2014。
[C07]黃盛霞,竹材的構造與力學行為的關係,安徽農業大學碩士論文,2004。
[C08]蕭伯川,竹材之性質與特殊加工,1971,林業工業(15):P6-12。
[C09]孙照斌、田芸、安胜足,竹材乾燥技術研究現狀,2006,世界林業研究 Vo.19 No.6:P41-44。
[C10]虞華強,竹材材性研究概述, 2003,世界竹籐通訊專刊 Vol.1 No.4 P5-9。
[C11]謝榮生,台灣產竹材超微構造之研究,國立台灣大學森林學研究所碩士論文,1985,P22-37。
[C12]劉正字、李文昭、王恩華,竹木材積層膠合製作高級製品及結構建材(I)-竹材基本物理機械性質及膠合性之探討,1992。林產工業11(1):P19-29。
[C13]黃信富,伐採季節對省產竹材加工利用性質之影響,國立中興大學森林學系碩士論文,2000。
[C14]廖坤福,木材乾燥引起乾燥缺點及其預防方法,1985,林業工業 4(1):44-57。
[C15]簡章慶,構竹-物質倫理與實體形構,國立成功大學碩士論文,2002,P20-27。
[C16]穆寶貴,台灣竹構建築結構體構法之調查研究,國立成功大學碩士論文,2007。
[C17]王守範,竹材之防腐防蟲方法,1962,臺灣木材工業(3):13-15。
[C18]吳學旦,藍浩繁,窯乾溫度對桂竹機械性質之影響,1986,林產工業 5卷1期 P15-23。
[C19]周芳純,竹材的力學性質,1998,竹類研究 第1期 P212-219。
[C20]湯穎等,熱處理工藝對竹材性能的影響,2014,浙江農林大學學報 31(2):P167-171。
[C21]卓志隆、李俊威,熱處理對孟宗竹材性質之影響-物理性質及耐腐朽性,2014,林產工業33(2):P79-88。
[C22]周芳純,竹材物理力學性質的研究,1981,南京林產工業學院學報 第2期 P1-32。
[C23]王卿平等,竹材密度測定方法及變異規律研究進展,2016,世界林業研究 Vol.29 No.2 P49-53。
[C24]王漢坤等,氣乾和飽水狀態下毛竹4種力學性質的比較,2010,林業科學 Vol.46 No.10 P119-123。
[C25]蘇文會等,大木竹竹材力學性質的研究,林業科學研究 19(5):P621-624。
[C26]蘇文會等,大木竹竹材物理性質的研究,南京林業大學學報 Vol.31 No.2 P42-46。
[C26]于文吉、江泽慧、叶克林,竹材特性研究及其進展,2002,世界林業研究 Vol.15 No.2 P50-55。
[C27]林裕鈞、張嘉祥、游嘉誠,台灣孟宗竹材構件結構行為實驗研究,2011,中華民國建築學會建築學報 第75期 P1-22。
[C28]王振瀾,省產竹材保存研究之回顧,1989,林產工業 8(3):P79-85。
[C29]王雅梅、劉君良、王喜明,竹材的特性與防腐技術,2004,木材工業 Vol.18 No.2 P28-32。
[C30]劉波等,兩項竹材物理理學性質試驗方法標準的比較,2008,木材工業 Vol.22 No.4 P26-29。
[C31]國家標準CNS454 O2005 【木材抗彎試驗法】。
英文文獻
[E01]Eur. J. Wood Prod. Studies on drying of imperial bamboo (2015) 73:411–414。
[E02]Dunkelberg, Klaus: Bamboo as a building material, in: IL31 Bambus, Karl Krämer Verlag Stuttgart 1992。
[E03]Thi Kim Hong Tang.Johannes Welling.Walter Liese,Kiln drying for bamboo culm parts of the species Bambusa stenostachya, Dendrocalamus asper and Thyrsostachys siamensis,J Indian Acad Wood Sci (June 2013) 10(1):26–31。
[E04]Walter Liese.(2003) Bamboo Preservation compendium.
[E05]Walter Liese.(2015) Bamboo The Plant and its Uses.
[E06]ISO/TC 165 N314 【Determination of physical and mechanical properties of bamboo】,2001
[E07]ISO/TC 165 N315,【Laboratory Manualon Testing Methods for Determination of physical and mechanical properties of bamboo】,2001
網站
[W01]林務局全球資訊網 http://www.forest.gov.tw
[W02]NGIS生態資源資料庫網站 http://ngis.forest.gov.tw/Download/Books.aspx
[W03]林業試驗所 http://woodsearch.tfri.gov.tw/bamboo/about_bamboo.php
[W04]國立台灣工藝研究發展中心 http://www.ntcri.gov.tw/dna/DNAItemList.aspx?diid=54&dcid=7
[W05]中央氣象局全球資訊網 http://www.cwb.gov.tw/V7/index.htm