過去有許多關於牙科複合樹脂和合金之間鍵結的研究和文獻，但關於Ti.7.5Mo的很少，因此本次主題關注於牙科複合樹脂SR Adoro、SR Nexco和Ti-7.5Mo合金之間的鍵結行為。本次實驗的試片準備和鍵結強度試驗方法遵照ISO 10477規範進行，Ti-7.5Mo的表面處理使用了陽極電解成色，並搭配不同號數的砂紙進行打磨，希望藉此找到有助於鍵結的參數。最後發現在ISO 10477所要求的冷熱循環水浴之後，SR Adoro的試片其鍵結強度明顯下降，而SR Nexco的試片甚至在水浴的過程中樹脂直接從合金表面上脫落，這是因為複合樹脂和Ti-7.5Mo的熱膨脹係數存在著相當大的差異。

This thesis is about bonding behavior between dental composites (SR AdoroⓇ and SR NexcoⓇ) and Ti-7.5Mo alloy. All specimens preparing process and shear bond test method followed by ISO 10477:2004(E) specification. Because of the thermal expansion coefficient difference between dental composites and Ti-7.5Mo, the shear bond strength will decay after cold-hot cycle water bath treatment.

Key words: dental composites, Ti-7.5Mo, shear bond strength test, ISO 10477.

Behr, M., M. Rosentritt, G. Groger, and G. Handel. "Adhesive Bond of Veneering Composites on Various Metal Surfaces Using Silicoating, Titanium-Coating or Functional Monomers." [In eng]. J Dent 31, no. 1 (Jan 2003): 33-42.
Bulbul, Mehmet, and Bulent Kesim. "The Effect of Primers on Shear Bond Strength of Acrylic Resins to Different Types of Metals." The Journal of Prosthetic Dentistry 103, no. 5 (5// 2010): 303-08.
Chang, Jeffrey Chai, Thomas L. Hurst, Deborah A. Hart, and Allan W. Estey. "4-Meta Use in Dentistry: A Literature Review." [In English]. The Journal of Prosthetic Dentistry 87, no. 2 (2// 2002): 216-24.
Choo, S. S., Y. H. Huh, L. R. Cho, and C. J. Park. "Effect of Metal Primers and Tarnish Treatment on Bonding between Dental Alloys and Veneer Resin." J Adv Prosthodont 7, no. 5 (Oct 2015): 392-9.
Craig, R.G., and J.M. Powers. Restorative Dental Materials. Mosby, 2002.
Diamanti, Maria Vittoria, Barbara Del Curto, and MariaPia Pedeferri. Interference Colors of Thin Oxide Layers on Titanium. Vol. 33, 2008. doi:10.1002/col.20403.
Feilzer, A. J., A. J. de Gee, and C. L. Davidson. "Relaxation of Polymerization Contraction Shear Stress by Hygroscopic Expansion." [In eng]. J Dent Res 69, no. 1 (Jan 1990): 36-9.
Ferracane, J. L. "Resin Composite--State of the Art." [In eng]. Dent Mater 27, no. 1 (Jan 2011): 29-38.
Guggenberger, R. "[Rocatec System--Adhesion by Tribochemical Coating]." [In ger]. Dtsch Zahnarztl Z 44, no. 11 (Nov 1989): 874-6.
Hamerton, I. Recent Developments in Epoxy Resins. Rapra Technology Limited, 1996.
Hornez, J. C., A. Lefevre, D. Joly, and H. F. Hildebrand. "Multiple Parameter Cytotoxicity Index on Dental Alloys and Pure Metals." [In eng]. Biomol Eng 19, no. 2-6 (Aug 2002): 103-17.
Kadoma, Y. "Chemical Structures of Adhesion Promoting Monomers for Precious Metals and Their Bond Strengths to Dental Metals." [In eng]. Dent Mater J 22, no. 3 (Sep 2003): 343-58.
Kim, Sangwoo, and Jyongsik Jang. "The Measurement of Degree of Conversion for Bis-Gma/Silica Composites by Ft-Ir Spectroscopy." Polymer Testing 15, no. 6 (1996/01/01 1996): 559-71.
Kojima, K. "Adhesion to Precious Metals Utilizing Triazinedithione Derivative Monomer." J J Dent Mater 6 (1987 1987): 702-07.
Lung, Christie Ying Kei, Dan Liu, and Jukka Pekka Matinlinna. "Surface Treatment of Titanium by a Polydimethylsiloxane Coating on Bond Strength of Resin to Titanium." Journal of the Mechanical Behavior of Biomedical Materials 41 (2015/01/01/ 2015): 168-76.
Matinlinna, Jukka P., Mutlu Özcan, Lippo V. J. Lassila, and Pekka K. Vallittu. "The Effect of a 3-Methacryloxypropyltrimethoxysilane and Vinyltriisopropoxysilane Blend and Tris(3-Trimethoxysilylpropyl)Isocyanurate on the Shear Bond Strength of Composite Resin to Titanium Metal." Dental Materials 20, no. 9 (2004/11/01/ 2004): 804-13.
Mizuno, Akira, Yoshihisa Toda, Masaaki Itoh, Katsunori Kojima, and Yoshinori Kadoma. "Nmr Analysis of Thione-Thiol Tautomerization of a Triazine Derivative in the Solid State and in Acetone Solution." Journal of Molecular Structure 441, no. 2 (1998/01/30/ 1998): 149-53.
Musil, R., and H. J. Tiller. "[Molecular Coupling of Resin Veneers to Alloy Surfaces]." [In ger]. Dent Labor (Munch) 32, no. 10 (Oct 1984): 1155-61.
Nguyen, J. F., V. Migonney, N. D. Ruse, and M. Sadoun. "Resin Composite Blocks Via High-Pressure High-Temperature Polymerization." [In eng]. Dent Mater 28, no. 5 (May 2012): 529-34.
Pérez del Pino, A., J. M. Fernández-Pradas, P. Serra, and J. L. Morenza. "Coloring of Titanium through Laser Oxidation: Comparative Study with Anodizing." Surface and Coatings Technology 187, no. 1 (2004/10/01/ 2004): 106-12.
Quinn, J. B., and G. D. Quinn. "Material Properties and Fractography of an Indirect Dental Resin Composite." [In eng]. Dent Mater 26, no. 6 (Jun 2010): 589-99.
Ruse, N. D., and M. J. Sadoun. "Resin-Composite Blocks for Dental Cad/Cam Applications." [In eng]. J Dent Res 93, no. 12 (Dec 2014): 1232-4.
Sailer, I., N. A. Makarov, D. S. Thoma, M. Zwahlen, and B. E. Pjetursson. "All-Ceramic or Metal-Ceramic Tooth-Supported Fixed Dental Prostheses (Fdps)? A Systematic Review of the Survival and Complication Rates. Part I: Single Crowns (Scs)." [In eng]. Dent Mater 31, no. 6 (Jun 2015): 603-23.
Schmalz, G., and P. Garhammer. "Biological Interactions of Dental Cast Alloys with Oral Tissues." [In eng]. Dent Mater 18, no. 5 (Jul 2002): 396-406.
Suzuki, M., A. Fujishima, T. Miyazaki, H. Hisamitsu, K. Kojima, and Y. Kadoma. "A Study on the Adsorption Structure of an Adhesive Monomer for Precious Metals by Surface-Enhanced Raman Scattering Spectroscopy." Biomaterials 20, no. 9 (1999/05/01/ 1999): 839-45.
Taira, Y., H. Matsumura, K. Yoshida, T. Tanaka, and M. Atsuta. "Influence of Surface Oxidation of Titanium on Adhesion." Journal of Dentistry 26, no. 1 (1998/01/01 1998): 69-73.
Taira, Yohsuke, and Yohji Imai. "Primer for Bonding Resin to Metal." Dental Materials 11, no. 1 (1995/01/01 1995): 2-6.
Tezvergil, Arzu, Lippo V. J. Lassila, and Pekka K. Vallittu. "The Effect of Fiber Orientation on the Thermal Expansion Coefficients of Fiber-Reinforced Composites." Dental Materials 19, no. 6 (2003/09/01/ 2003): 471-77.
Van Landuyt, Kirsten L., Johan Snauwaert, Jan De Munck, Marleen Peumans, Yasuhiro Yoshida, André Poitevin, Eduardo Coutinho, et al. "Systematic Review of the Chemical Composition of Contemporary Dental Adhesives." Biomaterials 28, no. 26 (9// 2007): 3757-85.
Wataha, John C. "Biocompatibility of Dental Casting Alloys: A Review." The Journal of Prosthetic Dentistry 83, no. 2 (2// 2000): 223-34.
Yoshida, Y., K. Nagakane, R. Fukuda, Y. Nakayama, M. Okazaki, H. Shintani, S. Inoue, et al. "Comparative Study on Adhesive Performance of Functional Monomers." [In eng]. J Dent Res 83, no. 6 (Jun 2004): 454-8.
鍾國雄. 牙科材料學. 合記圖書出版社, 1993.